I have four SATA III hard drives and two optical drives that I am trying to hook up to a Rampage IV motherboard. The mother board has eight internal SATA ports, which are tied to two seperate controllers (Intel X79 and ASMedia).I have eight OSs spre...
Hi guys,I've got a problem with my mouse recentlly. I use Razer Imperator 2012 as my mouse. The problem is my mouse periodically freezing and working back to normal, and it happens a lot. If I'm not lucky, my mouse is freezing and not working until I...
Hey guys I tried installing a IO Crest 2 Port SATA III PCI-Express x1 Card in my Rampage IV Extreme. I connected a 1TB HD and everything was fine until windows tried to boot......well it didn't. I have 2 OCZ vectors in raid 0 on my Inter sata 3 conne...
So I'm okay with my temps at 4.7 (hits ~88C under IBT but never goes over 75C under normal usage that averages 75%-95% usage 12+ hours a day) but I want to go the extra mile to water cooling (Have an H100 now) -- I have about ~500 to play with, obvio...
As the title says, basically.CL8 and CL10 are supported for Corsair PC16000 XMPIs it because CL9 is an odd number?The following below comes straight from the latest supported memory vendor-list thingy:CORSAIRCMT6GX3M3A2000C8(XMP) 6GB ( 3x 2GB ) DS 8-...
Hi its me again and sorry for spamming you . My system is 3930k, asus rampage 4, gtx 680 dc2, 4x4gb g skill 9-9-9-24 1.5V, windows 7 home prenium.When I browse I dont crash but when I play games I do. I freeze and comuter either reboots or I'm force...
Hello,i just updated my PC to Windows 8,but the AI Suite does not work with Windows 8.I'm told, there is no supported model installed.I also tried the AI Suite (2) of other boards - no way.So... is there no way to get the AI Suite to work with Window...
I am pretti much of a beginner but I have enjoyed building my system from scratch. With the latest upgrade, I have run into trouble.My previous drives configuration ran just fine:C: OCZ 1 TB Revo Hybrid (BOOT) OCZ 211GB Vertex SSDE: Seagate Baracud...
I've got a Maximus V Gene and the problem is when I install ROG GameFirst II, every time on startup I get this .Before you say "just uncheck the 'Always ask before opening this file' checkbox" let me say I've tried that and it doesn't work. I've done...
I cannot figure it out, I'm capping out at 400MBPS read ~360MBPS write under ATTO, and Crystal is spitting out 383/259 and I should be getting a lot more. I have this plugged into the asmedia sata6 port because my Raid0 is on the intel ones, and I ju...
