I seem to be having trouble getting my RIVE to WOL using a magic packet app or WHS2011 with AWIECO WakeOnLan. I have checked the properties of the NIC and found that Wake on Magic Packet is enabled by default. Am I missing something in the BIOS that ...
Hello,I hope someone can help me with my Problem.On a cold boot, my monitor will not show any display and the motherboard won’t POST !The VGA LED next to the PCIExpress x 16 slot is constantly lit.All Fans still running and i waiting some seconds, th...
Hi all,I'm getting some "Warning Voltage" from AI Suite II 2.01.01 for the SB, CPU/NB, DRAM. This is happening randomly, i also have my PC connected to a power stabilizer, and when this happens i also hear the sound of that stabilizer doing it's work...
Hello, does HWMONITOR show the case's ambience?http://img805.imageshack.us/img805/88/hwmonitork.jpg
Logitech G510 keyboard to be used on USB 3.0 or 2.0 ?
I got everything set up in the case and powered the system up for the first time. The lights on the MB lit up as they were supposed to do. I pressed the Start button, the power supply clicked and that was it. No fans, no new lights/leds, no post. ...
Hello allI have a chvfz and a fx-8350, my ram will not run at 1866mhz keeps defaulting to 1333mhz. Normally could set it in bios to 1866, but I get so much bottle necking and instability it's crazy! I just want advice from people with this setup or i...
Hi,I am getting two new SSD's, corsair Force GT's 120 Gb to put in RAID0 configuration, and I am confused of which Intel drivers should I go for? and which one to install first, Chipset, RSTe, IME? should I download them from Intel website, or ASUS?T...
Hey guys,I just updated to the latest BIOS and my ROG logo got changed to a really small version of the one I had before. Is there a place I can go to download the previous logos?Thanks in advance,Rev
Now my computer (Rampage IV Formula) is up and running I think I should go ahead and update the BIOS (my current version is 2105) to the latest version (I probably should have done this before I put everything on the board). The instructions in the ...
