@ rajahello ,whats the safest stock voltages for a rive with 3930k , vttvcciovttacpu pll voltageand the max safest voltages if you want to over clock the cpu to 4.8ghz or 5ghz , just for a validation or 3d mark run thats it would appreciate if some d...
So this is my first time installing a cpu into a motherboard. I'm installing an i7-4770k into an extreme vi and it seems like the amount of pressure to push the lever/arm down after the cpu drop is too much. I haven't adjusted the screw or anything l...
Well I seem to have my system throttling properly with voltage and multiplier correctly thanks in a large part to your guys help!! I'm idling around .88 vCore and at 4.7ghz under load at 1.344. Ran Prime95 for a few hours and after installing Ai Suit...
MB: Asus Z87-Deluxe bios 1007CPU: Core i7 4770k Batch L310B488RAM: Corsair 2x8GB CMY16GX3M2A2400C10OS: Windows 8 Enterprise x64my system is not overclockedProblem:1) Intel Ethernet Connection I217-V does not work at speeds 1Gbps. only 100Mbit :mad:2)...
C4F bios 3029 with FX 8350 8 core CPU is only running 2 cores. Is this supposed to happen? Is there a way to correct this? or could it be a bad cpu?
I can't enable the write back in the RST app it is greyed out but when I go the other way it is checked but not on the app and I know its not enable because my scores are way down.
Hey folksCouple of quick questions, I'm presently at work for another 8 days then will be home to "another" GTX 680 Classified Card (couldnt pass up a little Tri Sli fun when I get home....benching and what not).The GTX 680 Classified has impressed m...
Running a M6E with a 4770k at stock speed and using a Corsair h100i. Ambient temp is about 20-22C and the CPU in the bios monitor section is about 35C. Is this about right? Thanks.
SpecsFresh windows 7 x64Maximus HeroI7-4770KCorsair AX860iCorsair Vengeance 16GB (4 x 4GB)Evga 670Razor mamba Logitech G110 Issues1. Keyboard lights up but does not type(function) at first boot. Move it to another port it works until reboot2. Mouse t...
OK, it's like this......thanks to HiVizMan & Chino (And many thanks to these guys indeed) I'm up and running and really pleased with the progression with it so far and didn't go the way of the $65 RMA + shipping "hard and expensive lesson learned" on...
