Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Offset Mode doesn't work on idle maintains at 1.312v

Hi,I recently updated my BIOS to 4102 and was using for a couple of weeks and only realized recently that the offset mode in BIOS version 4102 doesnt work properly, i am using the same exact settings as i did before flashing over to the new BIOS. I h...

BSOD 124 on new computer build

Hi! I just built a new PC about 2 months plus ago and I frequently encountered bluescreens after about 1 week of stable operation. The bugcheck is always 124. The problem happens every 1-2 days and it is quite random regarding on any application whi...

leekh by Level 7
  • 21590 Views
  • 22 replies
  • 0 kudos

Crosshair V Formula (Non-Z) Booting configuration.

Hi allAlways when i turn on the PC, the pc shows the BIOS logo, and then, this sata controller stuff appears:is there a way to config this and just set the bios to bypass that, so it go to windows directly?Thanks!

Any Update on Rampage V release timeframe?

As title states, is there any update on Rampage V releasing? Previously it was stated Mid - May (2nd/3rd week) . So, today is start of week 4 the LN2 testing guys have been working it for over a month now (from their own reports) Any insight is appre...

Z87 Deluxe and ssd boot problems

i currently hav a z87 deluxe connected with a kingston SV100S264G and the issue is that sometime my mb see's my ssd other times it doesn't, however my normal hard drive it always finds it. I have to restart it alot of times until it finds the ssd and...

peste19 by Level 7
  • 23474 Views
  • 13 replies
  • 0 kudos

How do i reset back to using my pci-e GPU card?

On my maximus IV genz/gen 3 board i wanted to use the integrated graphics chip so i set under settings to use the integrated chip and i don't have the hdmi outlet thing which is needed i suppose.Anyway since i cannot even see anything on the screen a...

Bad Mobo

I have the Rampage IV Extreme and after only about 5 months it seems to no longer work. Here is what's going on.SPECS:ASUS Rampage IV Extreme,http://www.newegg.com/Product/Product.aspx?Item=N82E16813131802Intel I7-3820 Sandy Bridge Processorhttp://ww...

bchapp by Level 7
  • 3272 Views
  • 3 replies
  • 0 kudos

Weird issue...

Here is a weird issue i never came across . Has anyone seen this were the bios screen is small, the windows 8 boot logo screen is small. once it boots to windows 8 my monitor will say no signal. when i mean small. i have 20inch wide monitor 1680x105...

Maximus VI Hero Microphone troubles!!

So I just finished my new rig and all is well expect none of my voip applications can find my mic. I've reinstalled drivers about 10 times and fooled around with a tons of stuff-no dice. The kicker is that I can use my mic to voice search with Google...