cancel
Showing results for 
Search instead for 
Did you mean: 

Asus X99 Deluxe RAM Slot B1 Broken ?

ALELOCOOO
Level 7
Hi.
I got a brand new Asus X99 Deluxe, along with a i7 5960x and 64gb of Mushkin Blackline ram (this one http://www.ebay.com/itm/Mushkin-Blackline-994209F-DDR4-UDIMM-32GB-kit-4x8GB-PC3-22400-2800MHZ-16-16-... ). The speed says 2800, but i think thats only with XMP activated, without it its 2133.
Even though this brand is not listed as supported, works fine except for this:

The problem is, when i installed all the RAM, only 48 GB were detected, then i realized that CPU Z and Aida were able to see 56 GBs of RAM. Then i realized that the problem was with the slot B1. The slot B2 seems like its working, but since the B1 is not, the other slot can't be used.
I tried disabling XMP, setting the DRAM voltage to 1.3 isntead of 1.2, putting other rams on that slot, but nothing worked.
Also, i found this thread http://rog.asus.com/forum/showthread.php?52200-Asus-X99-Deluxe-wont-run-G-Skill-memory-at-XMP-for-s*... , where the user SkiMountaineer states that he's having an issue with this sam RAM slot (on another Asus X99 motherboard but still).


Here's a screencap of the info that AIDA64 shows.
This is with the ram on Slot B1 installed. Noticed how it doesnt show up :(.
http://i.imgur.com/VmXW25f.jpg

Would you reccommend setting the DRAM Voltage value for Channels A-B further than 1.3v? I don't want to burn anything : v.
Any input is appreciated.
4,093 Views
0 REPLIES 0