- last edited on by
ROGBot
Here are the components involved:
3x Samsung 2693HM
4x EVGA GTX 680 4GB (04G-P4-2686-KR)
1x Asus Rampage IV Extreme
My motherboard needs me to input one of the DVI cables to the top-most card in order to boot, otherwise, there is no video signal. Then I go to windows and configure NVIDIA surround, this is where the problem arises. NVIDIA surround requires me to put all the DVI cables from all 3 monitors to cards 2, 3 and 4. I don't want to have to do this every single time. Is there any way I can configure my motherboard to select which video card to recognize when booting up?
The guide NVIDIA has only goes up to 3-way SLI:
http://www.geforce.com/optimize/guides/how-to-correctly-configure-geforce-gtx-680-surround#4
So I assumed 4-way was using the same ports. When I use the above configuration though, here is the message I'm getting:
3x Samsung 2693HM
4x EVGA GTX 680 4GB (04G-P4-2686-KR)
1x Asus Rampage IV Extreme
My motherboard needs me to input one of the DVI cables to the top-most card in order to boot, otherwise, there is no video signal. Then I go to windows and configure NVIDIA surround, this is where the problem arises. NVIDIA surround requires me to put all the DVI cables from all 3 monitors to cards 2, 3 and 4. I don't want to have to do this every single time. Is there any way I can configure my motherboard to select which video card to recognize when booting up?
The guide NVIDIA has only goes up to 3-way SLI:
http://www.geforce.com/optimize/guides/how-to-correctly-configure-geforce-gtx-680-surround#4
So I assumed 4-way was using the same ports. When I use the above configuration though, here is the message I'm getting:
