cancel
Showing results for 
Search instead for 
Did you mean: 

able to post bios but cannot find boot device

watermoccasin
Level 7
Hi,
I just installed my new CrossHair V & i am able to get into the bios. But i cannot boot into windows.
I do not suspect ram becuase my Dram light is not on & bios says mem test is ok.

I get a message about not being able to find a boot device. Another message i get is something about intel something or other v1.3.51(im at work i can post the full message later) & something about LAN adapter config is corrupt or not initialized boot cannot continue.

What i find wierd is that i can see all 3 hard drives & cd drive in the bios & can change the boot order, but it cant boot. Also sometimes it will try to boot windows(ill see the little windows graphic & load bar) & then fail & resume the boot loop with the above messages.

I will be testing to boot up with a spare hard drive from another pc & test my current drives in another system as well.
Thanks in advance,
Sean

My build:
Antec DF-85 case
Crosshair V mobo
Amd. PhenomII x6 1090t
8gb(2x4) corsair vengeance ram
2 ati 5830 gpu's in crossfire(one sapphire,one xfx)
Wd 600gb hdd
Wd velociraptor 10k rpm 150gb
Crucial 60gb ssd(boot drive)
Xfx black edition 850w psu
219 Views
21 REPLIES 21

watermoccasin
Level 7
Thanks Nemesis, will do.
Chrsplmar, when i built the system i only re-used 2 drives for storage & running a few things, & save a few bucks on the initial build lol. I may upgrade them in the future, but they were fairly new(addon to the old rig not long before building the new rig)& they work just fine.
the ssd was new(boot drive & a few most used applications). I like the ssd, i do notice a bit faster booting(under 30 seconds from power button to ready desktop) & some games/programs ran a bit quicker & smoother. Especially if you get the SATA III. But yes, they are a bit pricey compared to an hdd

chrsplmr
Level 18
Sorry WM, wasnt directing that to you..
Just in general of what I have read.
Your do'n great...

Nemesis...thanks for confirming.
So now I am curious..would the updated one work?
And if it doesnt....hahahhahaha...update to?
Not I. (4now)
I am also running 506 bios without issue.
(Until FX.)