cancel
Showing results for 
Search instead for 
Did you mean: 

GTX570 DirectCU II Fit on a Gene-Z/GEN3 Mainboard

Black4
Level 8
If I'm only planning to run a single graphics card on a Gene-Z/GEN3 mainboard, will I have any issues with fitting a GTX570 DirectCU II on the board in an EATX capable case, given that it's a triple width card?

7441
A Republic of Gamers heart.

The all-new Subaru WRX is coming. Pardon our dust.
4,168 Views
3 REPLIES 3

puma99dk_
Level 9
i got a EVGA GeForce GTX 570 1280mb atm with a Gelid Icy Vision cooler taking almost 3slots and i have no problems with it, i use a Asus Xonar Essence STX in the PCI-Express x4.

and when u ain't planning on SLi i think u should have space enough.

HiVizMan
Level 40
Width wise it will fit as long as you are not planning on using anything else in the PCi or PCIe lanes. Is you are then it might be tight.

Will the card fit length wise is a question I would be interested in finding the answer too.
To help us help you - please provide as much information about your system and the problem as possible.

Black4
Level 8
There is plenty of room lengthwise in the Alien P2 case (EATX size) I have, so that's not an issue. It's the case size that matters with card length, as the card can hang over the end of the mainboard with no issue.

The only other card I'm running is a Hendrix for the Logitech THX speaker set up, but I wasn't planning to use that with the new build, and instead rely on the integrated SupremeFX III on the motherboard instead, for a cleaner and at least as modern feature.

Thanks for your comments, I appreciate them.
A Republic of Gamers heart.

The all-new Subaru WRX is coming. Pardon our dust.