cancel
Showing results for 
Search instead for 
Did you mean: 

GPU RTX 3060ti - RGB Lighting (Aura Sync) blinking red on startup.

Quiaolavells
Level 7

Whenever I startup my computer, my RTX 3060ti always blinking red. If I change the Aura Sync of my GPU to other effects (initially on 'Music' effect), it still won't stop blinking red but if I put it back on Music Effect, the blinking stops. What should I do to stop it blinking on startup and put it directly under Aura Sync? PS: The other components works fine under Aura Sync, only the RTX 3060ti isn't. Please help me. Thank you!

1,176 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Yes. Sounds like the sync issue I alluded to above. Keep an eye out for AC updates.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

View solution in original post

5 REPLIES 5

Silent_Scone
Super Moderator

Hi,

Could you take a video of the behaviour? Can you confirm if it's the Power Detect LEDs that are blinking red? Check that the power cables are correctly inserted.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Here is the link: https://www.youtube.com/shorts/UGkGMTxPNfc *I can't put the link because the video is too short.*
The Power Detect LEDs aren't blinking, I think it is Aura Sync issue. And the driver is updated.
Correct me if I'm wrong but the Power Detect LEDs troubleshoot is to turn off the PC then unplug it and plug it in again then turn it on and the Power Detect LEDs disappears.

Looks like you're in Darkmode but the GPU is not synced. This is a known issue, keep an eye on AC updates.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I'm always in Music Mode and my GPU is synced in Armoury Crate but I have to switch it to different mode first and put it back to Music Mode before my GPU syncs.

Yes. Sounds like the sync issue I alluded to above. Keep an eye out for AC updates.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090