NVIDIA Graphics Cards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Make Future GPU Feature Suggestions Here!

Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...

xeromist by Moderator
  • 5701 Views
  • 18 replies
  • 9 kudos

Resolved! 4070ti only works after restart

4070ti does not detect on fresh boot. After restarting the computer using the integrated gpu to run the display, the 4070ti detects perfectly 100% of the time. Nvidia graphics drivers have been scrubbed and reinstalled multiple times advanced power s...

thermal pad asus rog g713qr

Hello, I am writing this post to know which thermal pad is recommended for my Asus rog strix g713qr laptop since I have to change it and which thermal paste is better or liquid metal

Thermal Pads Size for ROG-STRIX-GTX1080TI-O11G-GAMING

Good Morning,First excuse my English.I will perform maintenance after 2 years of using my 1080Ti, and I had the intention of changing thermal paste and thermal pads.Can you tell me what measures the Thermal Pads uses this graph? I doubt between those...

Axiobyte by Level 7
  • 30877 Views
  • 5 replies
  • 1 kudos

Repaste Asus Rog Strix 1080 TI?

Hi,I have GPU Asus ROG 1080 TI Gaming. I builded PC in january 2018. It will be 6 years.I never replaced thermal paste and pads on GPU.I replaced thermal paste only on CPU.So question is should i replace thermal paste and pads on GPU?Temp in idle is ...

MPTraxx by Level 9
  • 461 Views
  • 0 replies
  • 0 kudos

3070 TI Strix Red Light

Hello. I purchased a 3070 TI Strix last year. The problem was the red light was blinking which I found out it means there isn't enough power. So, I took out my 650W PSU which was actually pretty bad and cheap and I bought a new one, a 850W XPG Core R...

ROG Strix LC 4090 CANNOT ENABLE ECC FUNCTION

When I enable ECC in the Nvidia Control Panel, a message prompts me to restart. However, after the reboot, ECC in the control panel remains disabled. I noticed that the ROG STRIX 4090 card has a BIOS update to address this issue. Could you provide a ...

Kidd232 by Level 7
  • 1133 Views
  • 2 replies
  • 0 kudos

About gpu tweak iii v1.7.0.7

Does anyone also have this version installed?Today it suddenly changed to this display mode ~ I didn’t have this screen beforeIn my impression, this should support the rog 4090 matrix.Today, I changed it to this interface by default~~~ Of course, it ...

GP3.jpg