cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS GPU Tweak III power limit only 100% no more why

deepakamba33
Level 9

i have asus tuf rtx 4090 oc edition ASUS GPU Tweak III power limit only 100% no more why?? i m worring

421 Views
2 ACCEPTED SOLUTIONS

Accepted Solutions

4 PCIE 8 pin made it powet 133% is work

 

Thank you so much v happy u r amazing 

View solution in original post

The temps in your HWINFO screen grab are all fine.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

View solution in original post

28 REPLIES 28

Silent_Scone
Super Moderator

Hi @deepakamba33 

1. Can you make sure Enhance Overclocking Range is ticked.

2. Are you using the supplied 12VHPWR adapter or a native cable / third-party adapter? Ensure the cable is fully inserted and the power LED indicator on the GPU is not red when the system is powered on.

Silent_Scone_0-1716033069151.png

 

 

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

20240518_175633.jpg

deepakamba33_0-1717411890079.png

what this flickering for several???

deepakamba33
Level 9

image.png

deepakamba33
Level 9

i don't have it 12VHPWR cable, i am asking.i was making on clo3d its closed again and again. why it happes? if get 12VHPWR than it will not close again?

Take a photo of the card and power adapter when the system is powered up.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Can't see the power LED from that angle.

Have you tried without using a riser?

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090