cancel
Showing results for 
Search instead for 
Did you mean: 

Asus GeForce RTX 5090 Astral Power Detect+ 12VHPWR warning after loading into Tarkov Raid

Stoick1337
Level 7

Hello everyone, 

After loading into the raid the power detect warning went off and when I looked in gpu tweak 3 the pin 4 was reading a little over 10A and after a bit it went down. After watching for a while longer I noticed pins 4, 5, and 6 all had higher readings than the other pins. I was wondering if this is a known issue and if there is a way to fix it or avoid it any insight or answers are appreciated.

403 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Silent_Scone
Super Moderator

Hi @Stoick1337 

This is a power imbalance that Power Detector + is designed to notify you of. The warning will trigger if one or more pins exceed 9.2A. Check that all power connectors are fully seated for the GPU, and if so, consider replacing the cable.

9800X3D / 6400 CAS 28 / ROG X870 Crosshair / TUF RTX 4090

View solution in original post

2 REPLIES 2

Silent_Scone
Super Moderator

Hi @Stoick1337 

This is a power imbalance that Power Detector + is designed to notify you of. The warning will trigger if one or more pins exceed 9.2A. Check that all power connectors are fully seated for the GPU, and if so, consider replacing the cable.

9800X3D / 6400 CAS 28 / ROG X870 Crosshair / TUF RTX 4090

Stoick1337
Level 7

Thank you for the response I will double check to make sure the cable is seated properly. I don't think the cable would be the problem as it is the cable that came with the ROG Thor 1200 platinum II.