ASUS ENGTX460 DirectCU TOP/2DI/1GD5

[Retired]

Checking if someone can tell me if the EK-FC460 will fit This Card

[martin_metal_88]

According to EK configurator it wont. It also list that they have no plan on doing a water block for this card.
Try it here :
http://www.coolingconfigurator.com/step1

[Retired]

I have two of theses cards, and I can't find any blocks that will work with them to save my dang life.

[martin_metal_88]

Unless you go with universal block I don't know any that will fit on this card. You could try to post on some watercooling dedicated forum maybe they will be able to help you a bit more.
GL.

[Retired]

Hi there,
I went with the universal EK and it worked a treat.













Im running EK'd 570s now but this worked very well, you will need the extra block extension bracket as well.

Merry Christmas

Rick

[martin_metal_88]

How is this block doing? With decent airflow in the case the memory should be good even if the block is not a full cover? Any result:P

[Retired]

well like I said Im running 570s now but had this set up for a month or so, as the mem and vrms dont touch the factory fit heat sink I didnt really need the extra copper sinx but fitted them any way.
as for temps , never over 40 deg' furmark maxed !! cant measure mem temps on this card but they were fine at max clocks, ( meaning the card worked fine no artifacts etc)

[martin_metal_88]

Well these are pretty good result so far for universal block. OP might find what he was searching for with these 😉