Hello, new build here with a Hero Z890 and a 265k.
Currently getting really frustrated with this PCI speed issue, as I already tried different settings in the bios to see if it goes to x16. Here's a list of what I tried:
- Changing modes on SA Configuration, auto gen4 and gen5;
- Tried different settings on PCIe Bandwidth Bifurcation Configuration;
- Check PCI connectors on the GPU and on the PSU side;
Question regarding these settings, do we have to turn off pc and recheck or does it change after a simple reboot? Asking because after every change I'd press F10 and then re-renter bios to check the stated speed.
And yes I've triple checked the manual and If you only use the M.2_1 (socket3) there should be no lane sharing:
As you can see I'm using the correct slot for my 990 Evo Plus only the m.2_1 is occupied ( green dot)
SA Agents settings
HWInfo64 showing x8
GPU-Z showing x8 even when doing the little render test to avoid any power saving features
So at this point im really lost as im not sure if this is a setting i must change, a bios version bug or a problem with the Mobo itself (hopefully not cause i really don't want to RMA this and disassemble everything. Is there a specific driver that I might be missing? Is there a list i can show? After I installed windows I downloaded all the most recent drivers, Chipset, DTT, Intel ME ect... I updated the bios before OS installation.
Appreciate any help, including someone from Asus as searching online leads to closed and unsolved threads and people putting the ssd's on the wrong slots which is not my case.
Full spec list:
- 265k ( stock for now as i want to resolve this first)
- HERO z890
- 4080 Super Suprim
- Kingston FURY 48GB (2x24) CUDIMM DDR5-8400
- 990 Evo plus 4tb
- HXi1500
- Windows 10 Pro 64bit
