cancel
Showing results for 
Search instead for 
Did you mean: 

Ok boys how is the OC on AL?

Hopper64
Level 16

I won’t have parts until tomorrow at the earliest. Probably take several more days to get everything together. How about OC on the 285k?

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro
964 Views
16 REPLIES 16

iBruceypoo
Level 16

Z890 Apex support pages new bios 0806 and manuals just went up this morning. 

https://rog.asus.com/motherboards/rog-maximus/rog-maximus-z890-apex/helpdesk_manual/

Z790 Epiphenomenal Raptor Bench

ROG Z790 Apex / Intel 13900KS SP111 P121 E93 MC83
Gskill 8000 kit - TM5 stable at 8200MT/s 38 48 48 121 VDD and VDDQ 1.5v
WD_Black SN850X 1TB 7300MB/s Reads 6300MB/s Writes
LG 32in 4K IPS 32UP83A-W

Hopper64
Level 16

Trying 0092 bios but still won’t boot into the bios under XMP1 with this 8800 kit by V color. It gets stuck at q code 28. I just put AI optimized on for now and memory running at 6400 in memtest86. Lots of settings to learn on this one.

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

Shamino
Moderator

try setting frequency to 9000 up from 8800

there is a hole there that needs to be fillled.

Hopper64
Level 16

Yep. It posted and then tested with memtest86 on a flash drive. That worked. Thanks Shamino!! Bios 0092. No change in voltage. It stopped at q code 28 for several seconds but then came back up into the bios. I have not installed windows yet.

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

the 0014 i posted in the resource link should fix this , but if 9000 works why not run that? 🙂

 

Hopper64
Level 16

Sounds good to me! Thanks!!

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

Hopper64
Level 16

I actually flashed 0014 to bios 2 and enabled XMP1 with this 8800 vcolor kit and it does work no problem. I also increased the frequency to 9000 and that booted fine as well. No changes otherwise. Still seeing a pause at q code 28 and then the system boots. Using AI OC for now until I can figure out how to OC this new platform. ?? Thanks again Shamino. Huge improvement.

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

Hopper64
Level 16

Tinkering with Gate Mode, cache ratio 40, NGU 33, D2D 38 with 3 P cores 57, 3 56, 2 55. Adaptive Mode for P, E and Ring. 46000 in CB23 but power draw likely way too high. Lots of errors but several HWInfo parameters don't show up (Beta??). Don't think I will be able to run this profile.

2.png3.png

MZ790AE Bios 1801, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.1 Noctua Edition, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

iBruceypoo
Level 16

Hey Mr. Hopper.

Did you grab a new Gskill CUdimm mem kit? 🤗

I can't find availability anywhere in the US...

Z790 Epiphenomenal Raptor Bench

ROG Z790 Apex / Intel 13900KS SP111 P121 E93 MC83
Gskill 8000 kit - TM5 stable at 8200MT/s 38 48 48 121 VDD and VDDQ 1.5v
WD_Black SN850X 1TB 7300MB/s Reads 6300MB/s Writes
LG 32in 4K IPS 32UP83A-W