cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus Extreme

wesjones
Level 7

Hi All got a issue with my new board,

Ive got the above  board with the ultra 9 and corsair m.2 MP700 PCIE Gen 5, and 2 other m.2  also running 4090 GPU,

Setup everything and when booting i dont get a display from the GPU, and only get a display if i use the onbaord HDMI,

Setup is Gen5 M.2 is on m.2_1 and other one is m.2.2

just cant get it to boot, if i enter bios using the hdmi cable and then remove the HDMI, the DP takes over on the GPU but when trying to install windows, it defaults to the on board one?

Any ideas. as had no issues on my other Z790 board.
Thanks

 

196 Views
6 REPLIES 6

antonyfrn
Level 10

Have you updated the bios to the latest one as there was a bug in the shipping bios? 

Maximus Extreme got no bugs with shipped bios.

Goodguyavi
Level 9

CUDIMM RAM ? (u must run CUDIMM, all other ram will give big problem)

thank you, pc is now working, full bios update replace cable to pd power, and seems to be ok now, but the memory might be a issue as having issues over clocking, gets stuck on error code 62 when using the AI, im using at the moment DOMINATOR TITANIUM
RGB DDR5 6600

 

snapdragon-x
Level 9

[Motherboard]Why does my Z890 motherboard fail to display via the graphics card when installing Wind...

ROG Maximus Z890 Exteme | NZXT C1500 Platinum | Intel Core Ultra 285K | MSI MAG Coreliquid I360 | Corsair Vengeance RGB 2x48GB DDR5 6000MT/s CL30 | Crucial T705 2TB | Lexar NM790 4TB | ASRock Arc B580 Challenger OC | MSI RTX 4090 Suprim Liquid 24G | Lian Li O11 D EVO XL

thank you