03-25-2023 05:57 AM
I have even used gpu-z and got the same under load or not.
Things I tried:
-went into bios and tweak pch configuration
-moved m2_1 to m2_2
03-25-2023 07:44 AM
I resteated cpu as well and no go
03-25-2023 08:49 AM
List all of your hardware for everyone to review. I wonder if using M2_2 drops the PCIe lane to x8.
03-25-2023 08:53 AM
Msi gaming trio 4090
Galahad aio 360
64gb G.skill trident z5 rgb 64000mz ddr5
03-25-2023 11:47 AM
Which PCIe slot are you using for the video card?
03-25-2023 11:51 AM
Nevermind. I see the slot from the picture you posted. Consider removing the nvme drive and boot into the bios. Does that change anything?
03-25-2023 12:01 PM
The manual unfortunately doesn't tell you about lane allocation, page 1-10. Is there anything connected to the SATA ports (page 1-11)?
03-25-2023 02:08 PM
Well, I'm going to have to buy a new board because it's stuck at x8 no matter where I place my m2. Maybe there is a bios eating shopping it but I tried everything from pch configuration to x16. I think I'll save up for a hero because I can't rma this card unfortunately.
03-25-2023 02:09 PM
Also, there is nothing in the sata ports.
03-25-2023 02:33 PM
If m2 in slot 2 like on screenshot or 1 is normal it go 8x but using m2 in slot 3-4-5 must give you 16x