XMP Crashes PC refuses to load even bios

[jagan2003]

Hello guys tried to enable XMP for RAM as soon settings are saved on bios, pc refuses to boot. XMP1 booted once for like 10 seconds before turning off. XMP2 never boots now I have reverted back to factory defaults both sticks running at 4800mhz

CPU - i9 14900k

MB - Asus Maximus Z790 Dark Hero

Ram - G.SKILL Z5 RGB Series DDR5 RAM 96GB (2x48GB)

BIOS - Updated to latest

Any advise greatly appreciated 

[Silent_Scone]

Hi @jagan2003 

Please state the memory kit part number to ascertain if the kit is on the memory QVL, and the designated frequency.

[jagan2003]

Yes this is the RAM kit I have installed

G.Skill Trident Z5 RGB Series 96GB (2 x 48GB) DDR5 6400MHz (F5-6400J3239F48GX2-TZ5RK)

Any advise will be greatly appreciated

[Silent_Scone · Accepted solution]

1. Ensure modules are in A2 and B2

2. Enable XMP II

3. Set DRAM Frequency to 6000MHz

Retest.

[jagan2003]

Hello Yes thanks for much needed help. Yes it was my mistake not checking the board manual to install it in proper slot to configure it for dual channel. I choose XMP1 & set it at 6200MHz system is fully stable now. May I know what does XMP Extreme profile stand for

Regards

[Silent_Scone]

No problem.

Have a look here for more information

[jagan2003]

Thanks mate