cancel
Showing results for 
Search instead for 
Did you mean: 

What is the purpose of a GPU lock?

OutSider420
Level 9
Can anyone explain to me what is the purpose of a GPU lock? I've always thought it was so when the card or riser cable is inserted the lock is there so you can't pull it out without releasing the lock,

Either I'm stupid or ASUS techs are incompetent as this is the idiotic reply I got over 4 RMA's on my Z690 Extreme. "Our technician tested the motherboard and the riser card together, and they worked fine with no issue; unless you try to pull it out."

:mad:

I swear this is the stupidest and most incompetent support I've ever dealt with
1,533 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Making two threads is spamming? If so they why don't ya ban me. 

 

 

View solution in original post

4 REPLIES 4

JohnAb
Level 17
You can always pull it out if you want to, lock or not. The slots are a firm enough fit that the GPU will stay in place anyway - assuming it's properly mounted and not being transported. The main idea is really just so that it doesn't get dislodged accidentally. It's not designed to make it impossible to remove, just a bit of extra security. To make it truly secure, it would need to be bolted or screwed down to the motherboard. However, that wouldn't be great either. A major shock would then just rip out a hole in the motherboard with GPUs being so heavy nowadays. Better than it can release in that scenario and hopefully everything survives.

Personally, I'm more concerned about sag which can damage the connector and I'd say that's far more important than the 'lock'. If I was transporting a PC, think I'd just remove the GPU to play it safe - or at least have the PC laying flat so that the GPU is vertical and not flexing the PCIe connector.
Z690 Hero, 12900K, BIOS 3603, MEI 2406.5.5.0, ME Firmware 16.1.30.2361, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

xeromist
Moderator
As was already made abundantly clear in the other thread that was locked: The problem is with your riser cable. The "foot" on your riser that the lock grabs onto is the wrong shape. BUT, you do not need to lock a riser anyway. It is not load bearing. If you are putting enough stress on a riser to cause it to pull out of the slot then you are simply putting too much stress on the riser and will eventually damage it.

Unless you can demonstrate that a GPU inserted directly into the slot cannot lock, then the problem is not with your motherboard. Further exchanges will not change reality. Stop abusing the RMA system. Stop spamming the forum when people have already tried to help you and you refuse to test the slot with something else.
A bus station is where a bus stops. A train station is where a train stops. On my desk, I have a work station…

Making two threads is spamming? If so they why don't ya ban me. 

 

 

How do I delete this account?