cancel
Showing results for 
Search instead for 
Did you mean: 

STRIX Z690-A D4: Legacy Game Compatibility Mode do not work after energy saving

Wolfsaccount
Level 9
I have found another bug! When i wakeup the mainboard from the energy saving mode, the Legacy Game Compatibility Mode do not work anymore, when i press the scroll lock key. I have testet the new 0807 and Beta 0803 Bios, both the same, under Windows 11.

Also there is no PCH Temp in Bios 0807, in Bios 0803 there it is!
2,298 Views
3 REPLIES 3

Adrian1983
Level 11
You know what that does not surprise me one bit, Remember when Asus removed the VRM temp monitoring from the last few gens? it is because people are noticing high chipset temps with Z690 on Asus boards mine included, I have undervolted both my chipset voltages on this board to the minimum they can go and it is still stable but guess what it's sitting here at 64c at idle! it isn't doing anything, If I start gaming it goes in the 70''s.

I am still not sure about other board vendors but in my opinion Asus had cheaped out on the thermal side of these chipsets, They are just getting too hot, What is the point in trying to cool your 12th gen as much as possible and the chipset is hotter, Ridiculous.

In WIndows VRM and PCH Temp are still there, i can read it out with HWInfo without a problem. I mean, in the Bios, there is only the VRM Temp and the PCH Temp is not there in Version 0807. The PCH Temp from 70 Degrees in no Problem, according to Intel White Paper the max Temp from PCH is 108 Degree!

Just for information - Legacy Game Compatibility Mode also do not work anymore after wakeup from energy saving with new 0901 Bios!