cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Z790 Maximus Formula

RavenknightH2O
Level 7

Hello, I recently purchased and built a new desktop PC but even with XMP 1 or 2 PC will not allow ran to run stock Corsair DDR5 Ram 5600 at that speed, only 4000mhz and have the most up to date bios (3/15/2024). All system settings stock, Need help, also tried to manually adjust Ram but still just loop failed reboots. Build:

Windows 11 Pro 64bit

Phanteks Enthoos Pro 2 Case

ASUS Rog Z790 Maximus Formula MB LGA 1700

Intel Core i9 14900k

Corsair i150 Watercooled AIO Triple Fan RGB

CORSAIR Vengeance RGB 96GB (2 x 48GB) 288-Pin PC RAM DDR5 5600 (PC5 44800) Desktop Memory Model CMH96GX5M2B5600C40

ASUS - TUF Gaming NVIDIA GeForce RTX 4070 Ti SUPER Overclock 16GB GDDR6X PCI Express 4.0 Graphics Card - Black

Thermaltake Toughpower GF3 1650W, ATX 3.0 Standard

Crucial T700 4Tab TLC Nand Flash PCIe Gen5 x4 NVMe M.2 Internal SSD

1000002375.jpg

400 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Vynra
Level 12

please use the correct slots A2 and B2 when you have 2 sticks of ram. so basically move each ram sticks 1 slot to the right. then try again

View solution in original post

3 REPLIES 3

Vynra
Level 12

please use the correct slots A2 and B2 when you have 2 sticks of ram. so basically move each ram sticks 1 slot to the right. then try again

You are the greatest, I really had a user error. Thank you for the swift response, and of course it worked!

Vynra
Level 12

im gald it works! enjoy the build. dont worry about making user errors. i still make them.