cancel
Showing results for 
Search instead for 
Did you mean: 

ROG MAXIMUS Z690 EXTREME + DDR5 G.Skill Trident Z5 6000 MHz UNSTABLE XMP

Ily3ss59
Level 7
MOTHERBOARD : ROG MAXIMUS Z690 EXTREME (BIOS V2103)
CPU : i9 12900k
DRAM : G.Skill Trident Z5 RGB 64 Go (2 x 32 Go) DDR5 6000 MHz CL30 (F5-6000J3040G32GX2-TZ5RK)

Hello everyone I got my new RAM and the problem is when I activate the XMP windows freeze after a few minutes I tried the XMP 1 AND 2 I need help thank you 😮
1,793 Views
13 REPLIES 13

buyukbang
Level 7
Hello,

This memory kit is on QVL list of your mainboard as mine (Z690-F) and I was considering to buy it, too. It's weird but I've read 3-4 people having problem with this memory kit on Asus Z690 series mainboards.

Do you have a stable manual configuration for this memory kit @4800Mhz or may be even more?

no I haven't tried in 4800 but I don't want to know it's in the QVL list it must work in 6000 otherwise why make a QVL list?:mad:

Check and update your bios if you haven't that is probably it, Gskill puts out great quality. I prefer it over all the other brands. Mine is clocked at 6000Mhz and if you read the post above I had it up to 6400Mhz with my 13 gen i9 overclocked 106% running it at 6.2 Ghz np. I don't recommend anyone doing this if they are not familiar with overclocking though and I did bring it back down to recommended settings, was just stress testing the memory and processor. 

buyukbang
Level 7
I completely aggree with u 😞 But I think you should be sure if your memory kit is working, that's why i suggest you trying to make it work at lower speeds. If it still fails, memory kit can be defective. If not, it will be Asus mainboard's fault at the end since this is a QVL kit which says this kit is tested at 6000Mhz on this board.

Hello everyone

I have the exact same Setup like ILY3SS59:
MOTHERBOARD : ROG MAXIMUS Z690 EXTREME (BIOS V2103)
CPU : i9 12900k
DRAM : G.Skill Trident Z5 RGB 64 Go (2 x 32 Go) DDR5 6000 MHz CL30 (F5-6000J3040G32GX2-TZ5RK)


First I had the Kingston Fury Beast 32 Go (2 x 16 Go) DDR5 5200 MHZ CL40. It worked with XMP I without problem.
After a few Months i changed to the mentioned new G.Skill DDR5.

I used XMP I and it worked since day 1 without a freeze, slowdown or any problem.
Maybe a faulty Ram-Bank on the motherboard or a faulty Memory Stick?
I had BIOS 2103 on it and NOT reseted settings after change of the RAM

Hope it helps. If u (or other user) have specific questions to the setup or settings,
dont hesitate to contact me directly or via reply here in this thread

Hey Simon,

Thank for the reply. I'm also trying to make a buying decision between Gskill 64gb 6000Mhz or Gskill 32gb 6600Mhz, both are on QVL. Have you had a chance to run this kit at and higher frequency as stable?

simon.leueuer wrote:
Hello everyone

I have the exact same Setup like ILY3SS59:
MOTHERBOARD : ROG MAXIMUS Z690 EXTREME (BIOS V2103)
CPU : i9 12900k
DRAM : G.Skill Trident Z5 RGB 64 Go (2 x 32 Go) DDR5 6000 MHz CL30 (F5-6000J3040G32GX2-TZ5RK)


First I had the Kingston Fury Beast 32 Go (2 x 16 Go) DDR5 5200 MHZ CL40. It worked with XMP I without problem.
After a few Months i changed to the mentioned new G.Skill DDR5.

I used XMP I and it worked since day 1 without a freeze, slowdown or any problem.
Maybe a faulty Ram-Bank on the motherboard or a faulty Memory Stick?
I had BIOS 2103 on it and NOT reseted settings after change of the RAM

Hope it helps. If u (or other user) have specific questions to the setup or settings,
dont hesitate to contact me directly or via reply here in this thread

buyukbang wrote:

I'm also trying to make a buying decision between Gskill 64gb 6000Mhz or Gskill 32gb 6600Mhz, both are on QVL. Have you had a chance to run this kit at and higher frequency as stable?


Hi Buyukbang
Hello Everyone

I was able to run a G.Skill Trident Z5 RGB 2 x 16GB, 6400 MHz, DDR5, CL32 under XMP I as stable thru benchs (FFXIV Bench 6.0 - 4K Max)
No tweaks / no changes in OC manually (like voltage, etc.).
Important to say, that I tested under Bios 2103 and that I never tried out XMP II (since it worked flawlessly under XMP I).

My decision was based on my needs aka better results on the game I play. The winner was CLEARLY the G.Skill Trident Z5 RGB 2 x 32GB, 6000 MHz, DDR5, CL30.
For my needs CL30 to CL32 > 6000Mhz to 6400Mhz & surely 64GB > 32GB.

Hope that helped on ur decision.

BTW:
Officially the ROG MAXIMUS Z690 Extreme supports 6400 Mhz native from scratch. Higher ones like 6600 Mhz are either new tested on a Z690
or more of a gamble based on a general list from Intel.

Have all a good day and stay safe ^^

Hello Simon,

Thank you for sharing your experience! I've purchuased and been running G-Skill 2x32GB CL30 6000Mhz (F5-6000J3040G32GX2-TZ5RK) kit on my Asus z690-F for 3 weeks @6200Ghz and it is rock solid stable on 2204 bios 🙂 I'm really happy on my decision, thx to your help! I'm currently using a 12900K on this setup but I've ordered a 13900k which this board and bios support and now waiting for the shipment. I just wanted to share my experience and confirmation on this setup for others.

P.S.: I wanted to write this before but there was a long maintanence on this forum.

Cheers!

simon.leueuer wrote:
Hi Buyukbang
Hello Everyone

I was able to run a G.Skill Trident Z5 RGB 2 x 16GB, 6400 MHz, DDR5, CL32 under XMP I as stable thru benchs (FFXIV Bench 6.0 - 4K Max)
No tweaks / no changes in OC manually (like voltage, etc.).
Important to say, that I tested under Bios 2103 and that I never tried out XMP II (since it worked flawlessly under XMP I).

My decision was based on my needs aka better results on the game I play. The winner was CLEARLY the G.Skill Trident Z5 RGB 2 x 32GB, 6000 MHz, DDR5, CL30.
For my needs CL30 to CL32 > 6000Mhz to 6400Mhz & surely 64GB > 32GB.

Hope that helped on ur decision.

BTW:
Officially the ROG MAXIMUS Z690 Extreme supports 6400 Mhz native from scratch. Higher ones like 6600 Mhz are either new tested on a Z690
or more of a gamble based on a general list from Intel.

Have all a good day and stay safe ^^

I had the same problem, they replaced my memory under warranty

My thread from another forum:

first of all I apologize for my language mistakes, English is not my native language.

Since assembling the computer (a few months ago) I had problems with G.Skill RAM (G.Skill Trident F5-6000U3636E16GX2-TZ5K 32GB). It is about the XMP profile after enabling it in the BIOS. As long as the profile is disabled or the profile is enabled but forced "DRAM Frequency" to less than DDR5-6000MTs (5800, 5600), the computer works ok.
However, when XMP1 or XMP2 (DDR5-6000MTs) is enabled, BSODs appear immediately, the browser crashes by itself.

The system also does not pass the stability test (system stress memory) in AIDA64 (the test stops after several seconds) (with DDR5-6000MTs always, with DDR5-5800MTs not always). The PRIME95 program also stops the torture test.


96656
96657
96658
96659
96660

I think they released a defective batch of these memory sticks onto the market.
The new memory chips they sent me, work fine.