10-23-2022 11:35 PM - edited 10-18-2023 07:21 AM
i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790
NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)
1) d/l and install ME driver
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/DRV_MEI_Intel_Cons_ADL_TP_W11_64_V2229320_20220809B....
2) update ME with ME Update Tool (I know there are newer versions but its not up on Asus official site yet so >= this version is fine)
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/MEUpdateTool_16.1.25.1885_T.zip
3) update to Latest BIOS of your choice
Note 2 for Z690: i have some Z690s that are already LOW in battery so you are advised to use a new Battery during this upgrade.
New test bioses
Z690 Apex
Z690 Extreme
Z690 Hero
Z690 Hero Eva
Z690 Extreme Glacial
Z690 Formula
Z690 Strix E
Z690 Strix F
Z690 Strix G
Z690 Strix A WIFI D4
Z690 Strix A WIFI
Z690 Strix I
Z690 Creator
Z690 Prime A
Z690 Tuf
Z690 Tuf D4
Z690 Tuf WIFI
Z690 Tuf D4 WIFI
---------------------------------------------------------------------------------------------
Z790 Extreme
Z790 Hero
Z790 Apex
Z790 Strix I
Z790 Strix F
Z790 Strix E
Z790 Strix A D4
Z790 Strix A
Z790 ProArt
Z790 Strix H
Z790 Prime A WIFI
Z790 Prime M Plus D4
Z790 Prime P
Z790 Prime P D4
Z790 Prime P WIFI
Z790 Prime P WIFI D4
----------------------------------------------------------------------------------------
Latest ocpak
Turbovcore
https://www.dropbox.com/s/ifsr8x0zncxcvyd/TurboV_Core_1.10.20.zip?dl=0
----------------------------------------------------------------------------------------
11-10-2022 10:50 AM
11-10-2022 01:59 PM
johnksss wrote:
You may need to slightly adjust your voltage for xmp tweaked version or your memory may be getting to hot if you can boot but memory test are not stable.
11-10-2022 05:40 PM
TomCom205 wrote:
I did a that of course ...
Luckly have beable to test the RAM an CPU on a EVGA Z690 DARK Kingpin. So the combination CPU+RAM is beable to do 8200 stable.
Must be something with the Board or Bios.
Like @itzjonjon69 said
7200 + 7400 Works well
7600 isn't possible atm to get it more than benchstable.
11-11-2022 04:30 AM
itzjonjon69 wrote:
I feel like i'm so close... "xmp tweaked" MC: 1.38V DRAM VDD/VDDQ: 1.5V
11-11-2022 10:19 AM
11-13-2022 03:27 AM
11-14-2022 08:37 AM
11-14-2022 11:21 PM