RaptorLake Resources

[Shamino]

i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790

NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)

1) d/l and install ME driver
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/DRV_MEI_Intel_Cons_ADL_TP_W11_64_V2229320_20220809B....

2) update ME with ME Update Tool (I know there are newer versions but its not up on Asus official site yet so >= this version is fine)
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/MEUpdateTool_16.1.25.1885_T.zip

3) update to Latest BIOS of your choice

Note 2 for Z690: i have some Z690s that are already LOW in battery so you are advised to use a new Battery during this upgrade.

New test bioses

Z690 Apex

Z690 Extreme

Z690 Hero

Z690 Hero Eva

Z690 Extreme Glacial

Z690 Formula

Z690 Strix E

Z690 Strix F

Z690 Strix G

Z690 Strix A WIFI D4

Z690 Strix A WIFI

Z690 Strix I

Z690 Creator

Z690 Prime A

Z690 Tuf

Z690 Tuf D4

Z690 Tuf WIFI

Z690 Tuf D4 WIFI

---------------------------------------------------------------------------------------------

Z790 Extreme

Z790 Hero

Z790 Apex

Z790 Strix I

Z790 Strix F

Z790 Strix E

Z790 Strix A D4

Z790 Strix A

Z790 ProArt

Z790 Strix H

Z790 Prime A WIFI

Z790 Prime M Plus D4

Z790 Prime P

Z790 Prime P D4

Z790 Prime P WIFI

Z790 Prime P WIFI D4

----------------------------------------------------------------------------------------

Latest ocpak

Turbovcore
https://www.dropbox.com/s/ifsr8x0zncxcvyd/TurboV_Core_1.10.20.zip?dl=0

----------------------------------------------------------------------------------------

[Dragonfly79887]

After updating to Bios 0801, it seems I can turn my computer on and off normally using the on/off button on the PC case. With my configuration, I didn't use XMP but just manually adjusted my DDR5 Cosair to 5800, then I got a blue screen error with the error error code: Bad ..... something I don't remember exactly. Then I tried adjusting my DDR5 to BUS 5600 and I got into Windows 10 normally. Currently my system is fine, I will continue to use it and hope it is stable. I will report back when there is new information

i9-14900K

ASUS ROG Z790 DARK HERO

Ram Corsair Dominator Titanium RGB 2x Kit 64GB

(2x32GB) DDR5 6000MT/s CL30

( Total 128 gb ddr 5 )

Sound Blaster AE-9

Network Card TP Link TX401

[Betroz]

Running four 32GB RAM sticks is asking for trouble. Be grateful if 5600 is stable...

[Dragonfly79887]

Thank you very much bro for the valuable information. Z790 Dark Hero, 14900K is not okay with 4 x DDr5. So if 4x48 gb DDR5 (Max 192 gb DDR5) do you think it will be better?

[Betroz]

The problem is running 4 sticks. If you REALLY need that much memory, then be prepared to run it at 5600 or even 4800 speed.

Do NOT use a BIOS for the old Z790 Hero on the newer Z790 Dark Hero. Go the the Asus website and download the correct BIOS there.

[Dragonfly79887]

Thank you Bro! I just changed my ddr5 to 2 Kit x ​​96GB - Ram PC Corsair Dominator Titanium 96GB 6600MHz DDR5 (2x48GB) CMP96GX5M2B6600C32 ( Total : 192 GB ) In BIOS I kept: Ai Overclock Turner: AUTO DDRAM FREQUENCY : 5600 Currently my 192 Gb is running fine at Speed ​​5600. I tried XMP with speed 6000 but I can't start my computer. I understand that you guys advise me to run 2 sticks of DDR if I want great speed so I just wanted to announce this.

[andino]

Back on 1703 and all is well. Rock solid. No errors on boot up so far and y-cruncher is working well at 7400.

[Dragonfly79887]

I have a Z790 Dark Hero. As I see, its latest BIOS is 0801. Can I ask if the new test BIOS of Z790 HERO, 0805, can be used for Z790 Dark Hero?

 

 

 

[KUNDIV2]

Where did you get the 0805 bios? I've been trying to find it in this thread but can't. Thanks for the help!

[Dragonfly79887]

You can find all new drivers or newer firmware from the Mokichu -  very famous on this forum. Link: https://rog-forum.asus.com/t5/hardware-build-advice/index-all-my-drivers-firmware-software-threads/m...

Be sure to download the correct driver for your system

[KUNDIV2]

I’m not sure if it’s me but I don’t see any bios at the link you sent