RaptorLake Resources

[Shamino]

i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790

NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)

1) d/l and install ME driver
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/DRV_MEI_Intel_Cons_ADL_TP_W11_64_V2229320_20220809B....

2) update ME with ME Update Tool (I know there are newer versions but its not up on Asus official site yet so >= this version is fine)
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/MEUpdateTool_16.1.25.1885_T.zip

3) update to Latest BIOS of your choice

Note 2 for Z690: i have some Z690s that are already LOW in battery so you are advised to use a new Battery during this upgrade.

New test bioses

Z690 Apex

Z690 Extreme

Z690 Hero

Z690 Hero Eva

Z690 Extreme Glacial

Z690 Formula

Z690 Strix E

Z690 Strix F

Z690 Strix G

Z690 Strix A WIFI D4

Z690 Strix A WIFI

Z690 Strix I

Z690 Creator

Z690 Prime A

Z690 Tuf

Z690 Tuf D4

Z690 Tuf WIFI

Z690 Tuf D4 WIFI

---------------------------------------------------------------------------------------------

Z790 Extreme

Z790 Hero

Z790 Apex

Z790 Strix I

Z790 Strix F

Z790 Strix E

Z790 Strix A D4

Z790 Strix A

Z790 ProArt

Z790 Strix H

Z790 Prime A WIFI

Z790 Prime M Plus D4

Z790 Prime P

Z790 Prime P D4

Z790 Prime P WIFI

Z790 Prime P WIFI D4

----------------------------------------------------------------------------------------

Latest ocpak

Turbovcore
https://www.dropbox.com/s/ifsr8x0zncxcvyd/TurboV_Core_1.10.20.zip?dl=0

----------------------------------------------------------------------------------------

[Fragbert]

"XMP II"  the default XMP settings set by the memory manufacturer (that is where you want to start if troubleshooting). "XMP I" is with additional Asus "enhancements" 

[Hopper64]

Yea. Started with XMP1 first, but still trying with XMP2. Thanks.

[Silent_Scone]

APEX Encore - 14900KF

UEFI 0506

Plug & Play

F5-8000J4048F24GX2-TZ5RS @ 8200MT / 1.45v VDD/VDDQ

All other timings and voltages board controlled 🙂

[Silent_Scone]

APEX Encore - 14900KF

UEFI 0506 

F5-8000J4048F24GX2-TZ5RS @ 8400MT / 1.61v VDD / 1.51 VDDQ

MCVDD 1.38v

All other voltage and timings board controlled 

[Agent-A01]

@Shamino @Silent_Scone 

Offtopic but can either of you report to ASUS driver team to fix the Realtek audio Mic gain option?

New Encore and I cannot play with my buddies because my mic is too quiet. Always used +20 Mic Gain on other boards but on these new refresh boards it's entirely broken. Cannot use older legacy SS3 drivers because the IDs are not included for refresh boards.

TLDR Realtek audio control panel the mic gain setting slider does nothing..

[Silent_Scone]

What driver are you using?

[Agent-A01]

The latest on Mokichu's thread. There's only one available AFAIK for Encore anyways.

[Silent_Scone]

Use the validated driver on the support page, RD recommended not to use the Realtek driver. (HQ is closed till Monday so that's as much as I know as of this time). May or may not pertain to that issue but should use due diligence in checking either way

[Silent_Scone]

Hi @Agent-A01 

Did you get time to try the driver from the support page?

[Hopper64]

Still no success with GSkill 8400 48G kit. Flashed from 0601 to 0506 today with no change. Bumped the VDD/VDDQ modestly to 1.44-1.48V with no change. Tried tuning SAV and MCC as well. No change. Older GSkill 8000 kit 32G no problem. Scone not having issues with his. Wonder if I just got a weak IMC on this chip 14900k and Encore board. Some at OCN question issues with the 48G kits? Still picking at it. ???