10-23-2022 11:35 PM - edited 10-18-2023 07:21 AM
i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790
NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)
1) d/l and install ME driver
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/DRV_MEI_Intel_Cons_ADL_TP_W11_64_V2229320_20220809B....
2) update ME with ME Update Tool (I know there are newer versions but its not up on Asus official site yet so >= this version is fine)
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/MEUpdateTool_16.1.25.1885_T.zip
3) update to Latest BIOS of your choice
Note 2 for Z690: i have some Z690s that are already LOW in battery so you are advised to use a new Battery during this upgrade.
New test bioses
Z690 Apex
Z690 Extreme
Z690 Hero
Z690 Hero Eva
Z690 Extreme Glacial
Z690 Formula
Z690 Strix E
Z690 Strix F
Z690 Strix G
Z690 Strix A WIFI D4
Z690 Strix A WIFI
Z690 Strix I
Z690 Creator
Z690 Prime A
Z690 Tuf
Z690 Tuf D4
Z690 Tuf WIFI
Z690 Tuf D4 WIFI
---------------------------------------------------------------------------------------------
Z790 Extreme
Z790 Hero
Z790 Apex
Z790 Strix I
Z790 Strix F
Z790 Strix E
Z790 Strix A D4
Z790 Strix A
Z790 ProArt
Z790 Strix H
Z790 Prime A WIFI
Z790 Prime M Plus D4
Z790 Prime P
Z790 Prime P D4
Z790 Prime P WIFI
Z790 Prime P WIFI D4
----------------------------------------------------------------------------------------
Latest ocpak
Turbovcore
https://www.dropbox.com/s/ifsr8x0zncxcvyd/TurboV_Core_1.10.20.zip?dl=0
----------------------------------------------------------------------------------------
11-24-2022 12:40 PM
11-24-2022 02:12 PM
11-25-2022 04:23 AM
glassjaw.au wrote:
Working through 803 atm.
One thing I've noticed - and not sure which version this changed - is the custom fan curves using the T-Sensor input are not working.
I'm running a custom loop with a T-Sensor reading my coolant temperature. All my rad fans are off Chassis Fan 1-3 headers. The bios is showing a reading on T-Sensor, so the input is there, but all the rad fans still scale up under CPU load.
Anyone having a similar issues, and can this be looked into please?
11-25-2022 05:00 AM
11-25-2022 05:55 AM
Smexhy wrote:
I just flashed latest test bios from rog forum for my Z790 maximus hero, reset bios to default settings and tried asus AI OC agian out of curiosity. What do you guys think about these values?
the last picture shows basically idle pc, core voltage being on 1.447v, temp 33 celsius,6.1ghz
(not sure why it shows maixmum watts at 350w in that one picture lol, thought there is some kind of limit)
11-25-2022 06:50 AM
raybantracing wrote:
core voltage is way too high as much as the wattage.
if you'll do something more demanding on the CPU it will be a throttle fest.
asus boards have no idea on how to correctly set a CPU even at stock frequency, leave alone when using the OC tools.
my extreme, with default settings, pushes 300W on my 13900K making it throttle at 100°C all the time, this is ridiculous.
11-28-2022 02:37 PM
raybantracing wrote:
core voltage is way too high as much as the wattage.
if you'll do something more demanding on the CPU it will be a throttle fest.
asus boards have no idea on how to correctly set a CPU even at stock frequency, leave alone when using the OC tools.
my extreme, with default settings, pushes 300W on my 13900K making it throttle at 100°C all the time, this is ridiculous.
11-24-2022 03:36 PM
Ataemonus wrote:
Is the IMC SP displayed only on certain Maximus boards, or does the Strix have that as well ?
11-19-2022 10:35 PM
sukrut4778 wrote:
Adaptive mode is not working for me from last 2 updates so I tried beta BIOS 2201 and it's still not working. It was working on 1720.
MB = Z690 Extreme
11-20-2022 02:36 AM
sukrut4778 wrote:
Anyone ?