RaptorLake Resources

[Shamino]

i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790

NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)

1) d/l and install ME driver
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/DRV_MEI_Intel_Cons_ADL_TP_W11_64_V2229320_20220809B....

2) update ME with ME Update Tool (I know there are newer versions but its not up on Asus official site yet so >= this version is fine)
https://dlcdnets.asus.com/pub/ASUS/mb/03CHIPSET/MEUpdateTool_16.1.25.1885_T.zip

3) update to Latest BIOS of your choice

Note 2 for Z690: i have some Z690s that are already LOW in battery so you are advised to use a new Battery during this upgrade.

New test bioses

Z690 Apex

Z690 Extreme

Z690 Hero

Z690 Hero Eva

Z690 Extreme Glacial

Z690 Formula

Z690 Strix E

Z690 Strix F

Z690 Strix G

Z690 Strix A WIFI D4

Z690 Strix A WIFI

Z690 Strix I

Z690 Creator

Z690 Prime A

Z690 Tuf

Z690 Tuf D4

Z690 Tuf WIFI

Z690 Tuf D4 WIFI

---------------------------------------------------------------------------------------------

Z790 Extreme

Z790 Hero

Z790 Apex

Z790 Strix I

Z790 Strix F

Z790 Strix E

Z790 Strix A D4

Z790 Strix A

Z790 ProArt

Z790 Strix H

Z790 Prime A WIFI

Z790 Prime M Plus D4

Z790 Prime P

Z790 Prime P D4

Z790 Prime P WIFI

Z790 Prime P WIFI D4

----------------------------------------------------------------------------------------

Latest M15ocpak
https://www.dropbox.com/s/jf7ob7r5quvri1c/M15_OCPAK1121.zip?dl=0

Turbovcore
https://www.dropbox.com/s/ifsr8x0zncxcvyd/TurboV_Core_1.10.20.zip?dl=0

----------------------------------------------------------------------------------------

[_tommy]

Hmm... the file for TUF D4 WiFi seems corrupted. "This is not a UEFI BIOS"....

Any changes to the DDR4 code? 2103 is horrible for Raptor Lake with 4 DR DIMMs compared to 12900K on older BIOSes.

[TZero]

Ily3ss59 wrote:
is it possible to return to the 2103 afterwards? Motherboard: Z690 EXTREME

It worked for me (Z690 FORMULA) using usb Bios Recovery

[Dasesh]

Ataemonus wrote:
No love for the PRIME Z790-A ?

it's absolutely sickening how many forums and places
Just don't show love to our motherboard Now I'm looking to get another z790 Asus board to get better online support *
*not really but might as well

[Shamino]

Ataemonus wrote:
No love for the PRIME Z790-A ?

there, check again

[Ataemonus]

Shamino wrote:
there, check again

Thank you so much, Shamino. Awesome.

[magy77]

I have a Maximus z790 Hero Board with the Gskil 7600CL36 Kits.

With 0801 Bios and XMP2 a had Systemfreeze.
I set the SA Voltage to 1.15, MC to 1.35. (VDD, VDDQ, and IVR TX 1.4)

The SA Voltage did the trick i think..

I was able to set 7800CL36 with SA Voltage to 1.15, MC to 1.35. VDD & VDDQ, 1.435 and IVR TX 1.4

XMP Tweaked works a lot faster than XMP2

[Silent_Scone]

magy77 wrote:
I have a Maximus z790 Hero Board with the Gskil 7600CL36 Kits.

XMP Tweaked works a lot faster than XMP2

XMPII is the default DIMM profile, some of the sub timings will be relaxed

magy77 wrote:

The SA Voltage did the trick i think..

There's still some of that with 13th gen, but not as much. Some CPUs will still get fussy, especially @ 7800 on the Hero where margins are tight.

[magy77]

On 7600 i had to lower the SA Voltage also to 1.15V (on Auto or 1.25V i get frezzes everytime)

@Silent Scone@ROG but the XMP Tweaked is new right? There wasn't a XMP Tweaked with Bios 0703

[Silent_Scone]

magy77 wrote:
On 7600 i had to lower the SA Voltage also to 1.2V (on Auto or 1.25V i get frezzes everytime)

@Silent Scone@ROG but the XMP Tweaked is new right? There wasn't a XMP Tweaked with Bios 0703

Yes this was added in one of the last updates.

regarding SA - signal rail things, sometimes less is better

[ScomComputers_L]

Shamino wrote:
there, check again

And the Z690 Prime P motherboards?
If you don't have a bios for it, you should write information about it, that there is no beta bios or something ! Thank you!