cancel
Showing results for 
Search instead for 
Did you mean: 

Pls help: Z690 extreme, new memory, long boot time.

Crasje
Level 12

Hello,

I have the Z690 and upgraded from 2 x 16GB (5600Mhz) to 2 x 32GB (6000mhz). I don't have XMP enabled (auto).

But with the new memory, it takes a LONG time to boot, minutes even. It looks like there is some memory activity going on. Eventually I get in and I see my memory (all 64GB), no errors in the device manager.

Does anyone have any idea what is causing this and how I can remedy it.


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉
1,451 Views
17 REPLIES 17

No need. Under the tools menu you're able to save and load profiles. If you've since changed your memory configuration without changing any parameters this would likely explain the behaviour you're seeing.

See FAQ https://www.asus.com/support/FAQ/1046388/

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I have 2 profiles saved there currently, the old 32GB settings, no XMP settings and the old 32GB with XMP settings. The are 8 places to save them and I have used 2 for these.

Just to have it clear, do you want me to:

- save current settings, clear CMOS, Load current settings?

- clear CMOS, load old settings?


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉

I think I solved it!!

I read in an article about removing and reinserting your Memory. Since it was such a low impact thing I tried it first. And now for 4 startups, it has been normal again!!!

Thanks for you help!


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉

No worries. Must have been poor contact, glad it's resolved.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Booting ok, next issue, just got a BSOD, Memory management.

0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
	contains the address of the PFN for the corrupted page table page.
	On a 32 bit OS, parameter 2 contains a pointer to the number of used
	PTEs, and parameter 3 contains the number of used PTEs.

updating your ram is hard... any suggestions for this?


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉

The system is still unstable. Run Memtest86 from within the UEFI at optimised defaults as suggested in my previous post and report back.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Hi,

Update: I am still having issues, besided the BSOD. My fav. game crashes 5 times in 10 minutes. Windows Memory diagnostic says immediately that there is a hardware issue before doing the diagnostic (that finds nothing) and tells me to back to the vendor.

I am fed up so I put in my old 2 x 16GB - 5600Mhz and it works flawless.

I will do 1 more try with 2 x 32GB -5600Mhz. This product IS in the list of compatible memory, CMT64GX5M2X5600C40(Ver5.43.13).

So much time wasted, first on the effort of 4 x 16GB, then these. I hope the next 2 are plug and play.... (no I pray for it actually)

 


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉

HI,

I am really extremely hesitant to use clear cmos, I am in my BIOS now wanting to take photographs of the settings, but there are like 2-300 things you can open and require a picture. I have no clue what is standard and not and what I should configure.


Cooler Master Silent Pro Hybrid 1300W ATX
Asus ROG Maximus Z690 Extreme
Intel Core i9-12.900k
ROG Ryujin 360
Corsair DDR5 Dominator Platinum RGB 2x32GB 5600Mhz
Samsung 980 PRO 2TB M.2 SSD (2x)
Seagate Firecuda 1TB
ROG RTX3080-O10G-Gaming
Monitor 1: ROG STRIX XG349C
Monitor 2: Samsung HDTV T27D590
ROG Claymore
ROG Spatha X
ROG Balteus Qi
Windows 11
😉