Hello everyone,
this is my pc:
- prime z790p wifi
- Kingston FURY Beast DDR5 32GB
- I5-13600KF
This is the story: I build my pc, everything works fine and I enter in the bios correctly. I put my usb with the last bios update, I regret that moment, and the process to install starts correctly. After a while, pc shut down. I think it will reboot it by its self but it's not. I wait a long time, guess 15-20 minutes, but it's not doing anything. I decide to start it and boom "asus bios recovery mode has been detected".
I put the file with the .cap extension in the root of my usb and restart the system, but I don't see anything on the screen and the pc seems to do anything.
I shut down everything again, and following some guide online, I unplug the power cable and remove the cmos battery for 3-5 minutes. Nothing.
Again, but this time, touch che header pins. Nothing again.
Now, when I start my pc, nothing appears on the monitor, the led on start button flash fast for 7-10 seconds and then still flash but slower.
Every components seems to start correctly but nothing appears on the screen.
It's not the first time I see this issue but it's the first time those actions do not works.
What I can do?
