cancel
Showing results for 
Search instead for 
Did you mean: 

new pc proart z790 many WHEA errors in idle windows 11

xxdolcexx
Level 8

hi i got new pc after my 14900ks died

 niew mainbord all run standard not newest bios 

PROART Z790-CREATOR WIFI BIOS 1801  

i have instal windows again and install all but i got so many whea erors now and i dont knouw whats causing it  my system is 14900ks  mainbord pro art z790 96gb ddr corsair  4090 msi supreme  1600 wat corsair titanuim the erors are this 

A corrected hardware error has occurred.

Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)

Primary Bus:Device:Function: 0x0:0x1D:0x0
Secondary Bus:Device:Function: 0x0:0x0:0x0
Primary Device Name:PCI\VEN_8086&DEV_7A30&SUBSYS_88821043&REV_11
Secondary Device Name:

 

A corrected hardware error has occurred.

Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)

Primary Bus:Device:Function: 0x0:0x6:0x0
Secondary Bus:Device:Function: 0x0:0x0:0x0
Primary Device Name:PCI\VEN_8086&DEV_A74D&SUBSYS_88821043&REV_01
Secondary Device Name:

 

any  know why its hapening i dont have  overclockk pc  also no asus  enhanced mode runing intel stock 

 

 

 

Primary Device Name:PCI\VEN_8086&DEV_7A30&SUBSYS_88821043&REV_11

162 Views
2 REPLIES 2

Silent_Scone
Super Moderator

Hi @xxdolcexx, FYI Proart is not a ROG product so it is best to post on the Zentalk forum or contact support directly.

You can try the following:
Please retest after following the below.

1. Flash to BIOS 2302 [or clear CMOS if already on 2302]

2. Set Intel Defaults > Performance Profile

3. Do not enable XMP or any other parameters

Confirm system stability.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

BenchAndGames
Level 10

You just have to disable the PCI Express Native Power Management, and ASPM from bios.