cancel
Showing results for 
Search instead for 
Did you mean: 

MZ790E bios 0904 supports DDR5 8000?

Hopper64
Level 15

Am I reading this correctly? New 0904 bios for the extreme supports 8000 DDR5? Don’t see that on the GSkill website for their 8000 product on the QVL or for Asus itself, but there’s this in the description for bios 0904:

 

FDEF071A-CB59-4E05-964C-631F43D8C547.png

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro
687 Views
12 REPLIES 12

Braegnok
Level 14

It would not surprise me if the Extreme 4-Dim board will run 24x2 @ 8000 stable.

Most likely you will see 4800, 5600, or perhaps 7200 stable with most CPU IMC running the new 24x2 memory kits.

Hopper64
Level 15

I have a 7800 kit GSkill running fine now. Had to manually tweak voltages a bit. XMP2, Tweak mode 2, VDD/VDDQ 1.47,  SAV 1.35. Passed TM5 no issue. 200MHz I am sure is a negligible difference. Wanted to try anyway. Thanks.

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

Yoda1
Level 7

Take a look at this article on Guru3D:

https://www.guru3d.com/news-story/g-skill-launches-up-to-ddr5-8200-ddr5-memory-kits-with-24gbx2-and-...

 

Your ass is grass, smoke it I will!

Hopper64
Level 15

Thanks. I am reluctant to believe an 8000 or 8200 kit will be easily OC on a 4 dimm board though. The higher frequency has been tested on the Apex of course, but not the extreme. I might try one though and see. 🙂

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

If it's on the QVL it has been validated as working internally.If it isn't on the QVL, remain pessimistic.

As you are already aware, this doesn't necessarily mean it's "easy". The highest validated ratios will have the least signal margin and require a reasonably good IMC.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Hopper64
Level 15

I think someone just copied and pasted that update to the memory on the Asus’ website. I really don’t think it really applies to a 4 dimm board as you have pointed out before. I am likely not to proceed with testing this as it may just be complete futility.

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

Hopper,  am I to understand you have to use XMP 2 to get the rate memory speeds on your kit? I have the 6000 Domiator kit from Corsair.

Intel Core i9 103900KS
Asus Maximus Z790 Extreme [bios 1801]
LG (34U97-s) Monitor 3440 x1440
Nvidia RTX 3090 FE
Windows 11 Pro
64gbz Memory

Hopper64
Level 15

You should be able to get 6000 to work no problem. I think I am using manual settings currently on the MZ790E, but XMP2 would probably work. I would try XMP1 as well. Trial and error. You might have to bump the VDD and VDDQ a bit. Hard to know without trying a few settings and testing in windows for stability.

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

Hopper, are you staying wit bois 0904 or bumping up to 1202? 

Intel Core i9 103900KS
Asus Maximus Z790 Extreme [bios 1801]
LG (34U97-s) Monitor 3440 x1440
Nvidia RTX 3090 FE
Windows 11 Pro
64gbz Memory