Am I reading this correctly? New 0904 bios for the extreme supports 8000 DDR5? Don’t see that on the GSkill website for their 8000 product on the QVL or for Asus itself, but there’s this in the description for bios 0904:
I have a 7800 kit GSkill running fine now. Had to manually tweak voltages a bit. XMP2, Tweak mode 2, VDD/VDDQ 1.47, SAV 1.35. Passed TM5 no issue. 200MHz I am sure is a negligible difference. Wanted to try anyway. Thanks.
Thanks. I am reluctant to believe an 8000 or 8200 kit will be easily OC on a 4 dimm board though. The higher frequency has been tested on the Apex of course, but not the extreme. I might try one though and see. 🙂
If it's on the QVL it has been validated as working internally.If it isn't on the QVL, remain pessimistic.
As you are already aware, this doesn't necessarily mean it's "easy". The highest validated ratios will have the least signal margin and require a reasonably good IMC.
I think someone just copied and pasted that update to the memory on the Asus’ website. I really don’t think it really applies to a 4 dimm board as you have pointed out before. I am likely not to proceed with testing this as it may just be complete futility.
Hopper, am I to understand you have to use XMP 2 to get the rate memory speeds on your kit? I have the 6000 Domiator kit from Corsair.
You should be able to get 6000 to work no problem. I think I am using manual settings currently on the MZ790E, but XMP2 would probably work. I would try XMP1 as well. Trial and error. You might have to bump the VDD and VDDQ a bit. Hard to know without trying a few settings and testing in windows for stability.
Hopper, are you staying wit bois 0904 or bumping up to 1202?