03-05-2023 10:36 PM
03-06-2023 11:33 PM
03-07-2023 07:59 PM
Beaurgard wrote:
Yo! depending on your motherboard you might need to use the riser card that came with it. also in the bios you have to change some settings. I think it's under Pci express settings. also check your bifurcation table and make sure that you have it in the right slot as only some of my slots can run a 5.0 m.2. hope that someone more knowledgeable can help ya sort it out if that doesn't lead you down the right trail. also motherboard model would help to know.
03-11-2023 10:42 AM
03-11-2023 12:13 PM
theroc44 wrote:
I've been in contact with asus, they told me to reinstall the NvME driver sry for the noob ? but I literally can't anywhere to get it let alone install it. Does anyone know how to force the nvme driver to reinstall in device manager? Thx
03-11-2023 12:29 PM
03-11-2023 06:30 PM
JohnAb wrote:
Â* Edit, forget to say, I recommend installing the VMD drivers even if not using RAID - they eliminate a yellow warning in Device Manager. In that case (not using RAID) just leave the related BIOS settings on defaults.
03-12-2023 01:20 AM
RogScott wrote:
Just to clarify - you will not see any yellow exclamation in device manager for VMD if it is not enabled in bios. IF enabled in bios, then yes - I agree - the driver should be installed. But unless using raid or optane, I think it is best to keep it disabled in bios, and then no drivers are needed.
03-11-2023 11:24 PM
03-12-2023 01:49 AM
theroc44 wrote:
Thanks for the advice. SO far I have reinstalled the chipset drivers, Me drivers, NVME driver. To no avail, I switched the setting for the M.2_1 slot from auto to Gen 5 same result. I even tried lowering it to Gen 3 to see if it would move down. That worked but after putting it back to Gen 5 it still stays stuck at Gen 4. I dont know what else to try. I might have to reinstall windows to see if that fixes it. But I really dont want to. For a fleeting moment right when I installed the drive it was working just fine after switching the drive to gen 5 in the bios. Cloning the drive somehow borked the pcie 5.0 transfer setting, I cant make heads or tails of it. Asus told me to reinstall everything I just mentioned, no dice. I'm hoping theres something i'm overlooking that can fix this fiasco. Otherwise its reset time.