intel I225-v REV 3

[VAODAA]

Hello, for the past few days I have been trying to flash the firmware to fix the ERROR 10 problem. I finally fixed the problem, but what I didn't know was that the 1.89 firmware I flashed with PXE was missing because it was 1MB (FXVL_15F3_V_1MB_1.89.bin). So I tried to flash another version from forums, but it was still the same problem. I lost the backup firmware. I finally flashed MODDED 1.94, which I found on a forum, but it was the same problem. No problem with CODE 10, but still no PXE. From the BIOS, I activate STACK NETWORK mode, but there is no choice for boot because the PXE ROM is missing. So I am looking for a solution because I cannot find any firmware that works. I have already tried the 2MB firmware, but it does not work. It tells me “Flash index is bad or out of range.” When I try with nvmupdate, it's the same thing. I've tried everything possible.

MOTHERBOARD / ASUS ROG STRIX B660-A GAMING WIFI

usefull info : BEFORE FLASHING TO 1.94 i was on 1.89 fw from a forum  /  fw i was before 1.89 was 1.63 !

Inventory
[00:005:00:00]: Unknown Device
	Flash inventory started.
	Shadow RAM inventory started.
	Alternate MAC address is not set.
	Shadow RAM inventory finished.
	Flash inventory finished.
[00:005:00:00]: Unknown Device
	Vendor                 : 8086
	Device                 : 15F3
	Subvendor              : 17AA
	Subdevice              : 22D8
	Revision               : 3
	LAN MAC                : 50EBF6951F25
	Alt MAC                : 000000000000
	SAN MAC                : 000000000000
	ETrackId               : 800002FC
	SerialNumber           : 50EBF6FFFF951F25
	NVM Version            : 1.137(1.89)
	PBA                    : n/a
	VPD status             : Not set
	VPD size               : 0
	NVM update             : No config file entry
	  checksum             : Valid

now on 1.94 i have this config :

Config file will not be read.
Inventory
[00:005:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Alternate MAC address is not set.
        Flash inventory started.
        Shadow RAM inventory started.
        Shadow RAM inventory finished.
        Flash inventory finished.
[00:005:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Vendor                 : 8086
        Device                 : 15F3
        Subvendor              : 1043
        Subdevice              : 87D2
        Revision               : 3
        LAN MAC                : 50EBF6951F25
        Alt MAC                : 000000000000
        SAN MAC                : 000000000000
        ETrackId               : 800003FC
        SerialNumber           : 50EBF6FFFF951F25
        NVM Version            : 1.148(1.94)
        PBA                    : M10089-000
        VPD status             : Not set
        VPD size               : 0
        NVM update             : No config file entry
          checksum             : Valid

the ETRACK tottaly changed and i dont know what to do everysingle firmware i try to flash is not able to flash i can show some screen log when i try to flash with NVMUPDATE  i edit the config file to try to match but end up to fail so 15F3 1MB FW15F3 1MB FWASUS FW

[VAODAA]

if someone with samemotherboard like me can be humain and try to dump and send me his firmware  would be very  grateful.