Showing results for 
Search instead for 
Did you mean: 


Level 7

Hello guys, I'm having issues installing Windows 10 pro on my RAID 0. I've successfully created a RAID 0 with my 2 1tb NVMe wd black drives and it's showing perfectly on the BIOS as a 2TB RAID0.


The problem is that on Windows 10 install the RAID partition doesn't show up, ive downloaded a ton of drivers and manually selected them all but still can't get the RAID to show. Can someone please post a link to the correct drivers?

Its a ROG MAXIMUS Z690 HERO motherboard.

Thank you all!



Level 16

When you say the RAID partition, have you used the entire NVME drives or have you selected partitions on each? Only a thought as I have never used motherboard RAID myself. However, if you don't have them installed, I think you might need to install the VMD drivers which MoKiChU supplies here:

I might be wrong, but hopefully that leads you in the right direction? I'm not sure if you mean that you can't even install Windows (in which case the drivers won't help) or if you just can't see the RAID partition in Windows which has been created from sub-partitions. If that's the case, try using the entire NVME drives. That's what I would try at any rate. 

My preference is not to use motherboard RAID 0 in case a drive fails, but if you can afford to lose any data and just want the speed then I get it.  

Z690 Hero, BIOS 2802, MEI 2336.5.2.0, ME Firmware, 7000X Case, RM1000x PSU, i9 12900K, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.