[DRIVERS] Marvell/Aquantia Ethernet

[MoKiChU]

Hi everyone,

- Marvell/Aquantia Ethernet Drivers (Drivers Only) :

Drivers : 3.1.8.0 WHQL [17/04/2023]
Download : Link

Install/Update Process :

- Press Windows key + X > Device Manager > Right-click on your Marvell Ethernet device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (ETHERNET_Marvell-Aquantia_v...) > Next

OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Marvell/Aquantia Ethernet controller.

TIPS :

If you want to manage the drivers (remove old/unused drivers for example) that you have in your Windows DriverStore
Use Driver Store Explorer (Right click on "Rapr.exe" > Run as administrator).

If you want better interrupts delivery latency
Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column "supported modes") with
MSI Mode Utility (Right click on "MSI_Mode_Utility_v3.exe" > Run as administrator).

[DmitriyS]

Thank you @MoKiChU

[MoKiChU]

Hi everyone,

- Marvell/Aquantia Ethernet Drivers (Drivers Only) :

Drivers : 3.1.7.0 WHQL [02/06/2022]

Thread updated.

[DmitriyS]

Thank you @MoKiChU

[MoKiChU]

Hi everyone,

- Marvell/Aquantia Ethernet Drivers (Drivers Only) :

Drivers : 3.1.8.0 WHQL [17/04/2023]

Thread updated.

[rene_bonvanie]

Hi @MoKiChU, thanks for all your amazing efforts. Are there release notes to this update? I can't find anything on the Marvell site. I have a Presto Solo 10Gbe SFP+ network card and would like to understand the consequences of upgrading from the current 3.1.7.0 firmware version.

[iamroot4ever]

I'm a little concerned as well. It's been months since this showed up on station-drivers, no release notes, no other downloads out there. The .inf is eay enough to change a version number; what else might have changed? 

[kraven72]

I have come across a new AQC107 fw 4.2.46 on Lenovo's website dated 16 March 2023 :

workstations :: thinkstation p series workstations :: thinkstation p620 Lenovo PC Support - Lenovo S...

Readme states :

Marvell AQC107 FW Package

Change log shows :

Release Notes
=============
4.2.46 Dec 1, 2021
Fixed changing operating-system state to "Quiesce" if host OS is in sleep or being restarted.
Stopped Dhcp release in case of link down when static ip is configured in exclusive mode.

4.2.45 Oct 7, 2021
Fixed broken text redirection feature for ssh and telnet mode

4.2.44 Sep 20, 2021
Increased the supported boot device settings from 7 to 8 and processing of boot configs is skipped if the number of boot devices is more than 8
Fixed Dash Server to enable on switching from shared to exclusive config and vice versa

4.2.43 Aug 3, 2021
Fixed Making DHCP leased IP visible in "IP-Interface" profile
Fixed Making DHCP leased IP visible in "AqDashConfig show"

4.2.42 Jun 10, 2021
Added support for DHCP IP in Exclusive mode
Removed getFields and simplified invokeMethod to optimize memory

4.2.41 May 31, 2021
Fixed Settable Threshold properties value returns NULL - Sensor Profile
Fixed Supported Thresholds property values reported as NULL - Sensor Profile
Fixed ImplementedFeatures value is NULL in Physical Computer system View profile
Fixed CIM_HostedCollection Assosciated role must be dependent - Software Inventory profile
Fixed CIM_ConcreteDependency role must be dependent for CIM_FilterCollection - Indication Profile
Fixed CTS issues for Watchdog profile
Fixed "Other Type Description" field is set to telnet/SSH for text redirection profile

-------------------

Applied it to my Zenith II Extreme, by amending the usual ID's, and it seems to be working fine. (But as with this kind of thing, buyer beware if you apply it yourself. If you have any issues, disconnect the power for 60 seconds, then try again).