cancel
Showing results for 
Search instead for 
Did you mean: 

DDR5 die type

Hopper64
Level 15

I was curious as to how to access the die type of the GSkill 8400 memory kit so I downloaded and installed thaiphoon burner and Rammon. Neither give me the die type. I think it's M die by Hynix but where do you access that information? Had to allow SPD detect in the bios with TB.

 

tpb.png

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro
713 Views
18 REPLIES 18

JohnAb
Level 17

Try using HWInfo - it gives the die type for my RAM:

JohnAb_0-1714212866204.png

 

Z690 Hero, 12900K, BIOS 3603, MEI 2406.5.5.0, ME Firmware 16.1.30.2361, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

Thanks guys. I was wanting an application to give me that. Didn't know HWInfo did. Appreciated!!

Mine says 0.0. ??

122.png

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

iBruceypoo
Level 16

Fairly certain ALL the Gskill 2x24 kits are M-die.

A-die stopped at the 8000 CL38 2x16 kit, the kit I'm using. 

Kinda hoping Arrow Lake Z890 starts using A-die kits once again, faster of course. 8600 A-die, 8800 A-die, 9000 A-die, since I really have no need for 48GB of RAM, and would rather run less dense kits with lower thermals. 🙂

Z790 Epiphenomenal Raptor Bench

ROG Z790 Apex / Intel 13900KS SP111 P121 E93 MC83
Gskill 8000 kit - TM5 stable at 8200MT/s 38 48 48 121 VDD and VDDQ 1.5v
WD_Black SN850X 1TB 7300MB/s Reads 6300MB/s Writes
LG 32in 4K IPS 32UP83A-W

I would too. Higher frequency and lower density would be nice. 

I just tried enabling SPD detect in the bios and I have the same result. ??

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

Silent_Scone
Super Moderator

As above, 24GB will be m-die Hynix

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Yes, I have read that, but I want to download a software application to tell me that. I can't seem to find one. ??

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

AIDA64 should?

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I will check that tomorrow. Thanks. 

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro

So in AIDA64 I found this. I just don't see M die listed under stepping.

1.png

MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro