Boot loop after clean install

[ROGn8fvp8qjel4p]

asus proart z790-creator wifi

Intel i7 14700

Had some problems with Windows and decided for a clean install. 

Everything is fine. I install. It asks me to use onboard LAN and download asus armoury crate. It installs and when it reboots, it goes to recovery mode.

Tried to NOT install crate. Everything works until I start installing drivers. Then it goes to recovery again.

What could be the problem? 

[ROGn8fvp8qjel4p]

I can boot to safe mode

[Nate152]

Hello ROGn8fvp8qjel4p

If it's wanting to do a recovery, let's hope you don't have a failing drive.

When installing Windows and Armoury Crate, this is how I do it:

1) Reset the bios to default settings (F5 Key).

2) Wipe the drive clean during the format options, install windows.

3) Install the chipset driver for your motherboard - version V10.1.20062.8627  ProArt Z790-CREATOR WIFI｜Motherboards｜ASUS Global

4) Update the graphics driver.

5) Install an audio driver if needed.

6) Update windows.

7) Install Armoury Crate.

How does this go?

[ROGn8fvp8qjel4p]

I did All that - several times.

At one point I could boot in safe mode, but when I tried to open Edge Browser (to install Chrome) it went to recovery again.

Changed my brand New corsair 850W psu to an old 650W and now Everything works..... 

[Nate152]

That's quite odd a power issue would cause a recovery, I might not have suspected that.

Nice find !

Care to share your gpu and the model of your Corsair 850w psu?

You might want to contact Corsair for a replacement.