cancel
Showing results for 
Search instead for 
Did you mean: 

Bios

BarryLu
Level 7

Hallo,habe das Mainboard Prime z690-p wifi bin seit gestern pausenlos dabei einr Zusatzkarte zu aktivieren (Hyper M.2 X16 Card V2).

Nach dem Einbau mit 4 M.2 Modulen zeigt mir Windows nach Neustart nur eine M.2 an.Dann bin ich ins Bios habe dort das letzte Bios-Update drauf gezogen doch anscließend  das gleiche Problem.Bin dann nochmal ins Bios und habe versucht einige Einstellungen zu ändern...nichts hat geholfen.Heute Morgen starte ich den PC neu und meine Beleuchtung-Beleuchtungseinrichtung über Armoury Crate

reagiert nicht mehr also ich kann sie nicht verstellen.Gibt es eine Möglichkeit das Bios auf Erstkonfiguration zu laden.Ich hoffe auf Hilfe.

354 Views
2 REPLIES 2

JohnAb
Level 17

Yes, you should be able to reset the BIOS by pressing the clear CMOS button on the back of your motherboard panel for a couple of seconds. That should reset everything back to defaults. If your motherboard doesn't have that button, then check the manual. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

Good job, pleased that it helped...

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.