cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS 3101 Comments

JohnAb
Level 17

Any experiences/comments - please add here...

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.
19,894 Views
74 REPLIES 74

JohnAb
Level 17

I'll try this new BIOS later today,

ROG MAXIMUS Z690 HERO BIOS 3101

Version 3101
13.13 MB 2023/12/29

1. Improve system stability
2. Update ME to version 16.1.30.2307
3. This update includes the patch for the LogoFAIL vulnerabilities
4. Add PCIe Bifurcation options for GPU with M.2 storage

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

JohnAb
Level 17

I've just updated, nothing obviously different for me. The CPU power consumption might be 3-4W lower to 15-16W as a minimum, but hard to tell for sure as it varies anyway. XMP is on, everything seems to be stable. If I find any issues, will report back. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

My CPU's (i9-13900) wattage is now 16 to 21 when idle. The CPU's temps is around 41 degree C. Think it is much lower than before.

1100R
Level 9

I see this notice in Device Security: "No tpm available. Check the BIOS settings."

Is that in Windows Security Centre? Don't think I have a similar message...

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

Yes, the warning appeared but it is now solved, although it appeared activated it was necessary to click again on bios: Go to Advanced\PCH-FW Configuration page and enable "PTT".

Nice to have an easy problem! Glad it's sorted.

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

lILucianIl
Level 7

Guys, how can I fix it? I'm not ready for such changes message on half the screen. was normal small fine print, how to replace?IMG_20231230_144836.jpg

Without checking again, I think my screen looks the same after the update. If you don't like it, then you should be able to go back to the previous BIOS if it bothers you. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.35.2557, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.