cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS 2703 Feedback

JohnAb
Level 17

What experiences do people have with the new BIOS release? I haven't tried it yet myself. The support page says that ME firmware will be updated to 16.1.27.2176.

I'm already on a later version (16.1.30.2255) with BIOS 2602. Does anybody know if this could cause a problem? Just makes me a little nervous in terms of what could happen. I'm assuming that if on a later version then the ME update will not happen, but would like to know if anybody else has updated to 2703 with a more recent ME version.

Also, does anybody know if it's possible to go back from this latest version if any problems? Thanks. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.32.2473, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.
16,837 Views
54 REPLIES 54

1100R
Level 9

I just updated to the new version, it is too early to know if it has any problems. At the moment everything works as it should.

cekeu
Level 12

You can downgrade the bios to the previous version with the BIOS FlashBack button

Good to know, thanks. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.32.2473, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

JohnAb
Level 17

So I just upgraded and even with a more recent ME version, no problems. The latest version stayed in place. The BIOS also seems fine so far. I can't see any differences from 2602 in terms of temps. 

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.32.2473, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

Hey @JohnAb, have you noticed any performance issues since the BIOS update?  Usually when the words Mitigation, Security, and Vulnerabilities are in the same sentence, that often means an impact to performance.  Hopefully not in this case.

Ryan Blake - IT Leadership Professional
Asus ROG Maximus Z690 Hero Motherboard - Intel i9-14900KF - Corsair RM1000x - Corsair Vengeance DDR5 RAM 32GB (2x16GB) 6400MHz (CMK32GX5M2B6400C32) - 1x Samsung 990 Pro 2TB & 1x Samsung 980 Pro 2TB SSDs - PNY GeForce RTX 4090 - Windows 10 Pro x64

Hi Ryan, I've not run any benchmarks, but no, everything seems exactly the same after a couple of hours. Boot times and general performance, CPU power consumption, PCH temps, RAM temps - it all seems OK. Hold on, let me run Cinebench R23 and see - so I get 26,500. That's higher than the 26,000 I got  last time I ran it a few weeks ago. So maybe not enough runs to be sure, but certainly not worse. 

Yeah, think I can say it's all good - for me at least...

Z690 Hero, 12900K, BIOS 4001, MEI 2433.6.3.0, ME Firmware 16.1.32.2473, 7000X Case, RM1000x PSU, ASUS TUF OC 3090TI, 2 x 16GB Corsair RAM @ 5200MHz, Windows 11 Pro 23H2, Corsair H150i Elite AIO, 4x Corsair RGB fans, 3x M.2 NVME drives, 2x SATA SSDs, 2x SATA HDs.

bass_junkie_xl
Level 12

2nd pc 
strix z690 D4 
13900 ks delided @ 59 P /51 R /45 E
 16 gb x 2 dual rank g,skill royal 4000 mhz 16-16-16-36 
@ 4,300 mhz cl 15 Gear 1 @ 1.60v  dim / 1.28 vcssa / 1.35 vddq

ram still passes  y cruncher vst / r23 / passes all game shader tests , cod mw1/cod mw2 ,bfv ,bf 2042 , fc6

last 3 bioses have been super solid 

Rig # 1 - 14900Ks SP-124 | 90 MC @ 6.0 GHZ | 5.2 R | 4.7 E | DDR5 48GB @ 8,600 c36 | Strix RTX 4090 | PG27AQN 1440P 27" 360 Hz G-Sync ULMB 2

Rig # 2 - 14900Ks-SP-118 | 89 MC @ 5.9 GHZ | 5.2 R | 4.7 E | DDR4 32GB @ 4,533 c16 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync

Khilendel
Level 7

Z690 Creator Wifi / 13700K

I updated to 2703 tonight and after loading my previous settings (0.04v undervolt, 6000mhz) I had instability in windows, GPU errors, black boxes appearing on screen, eventviewer errors, etc. - Rolled back to 2602 and loaded the same settings (saved to a CMO file on thumb drive) and everything was fine again. May be anecdotal but for me this update seemed to introduce some issues.

jamieboo
Level 9

I'm curious about this new bios. Seems that, despite one or two unfavourable results, this is a pretty solid one.

I have a Z690 TUF Gaming Plus Wifi D4. I'm still on 1304, because over the last year the bios updates seem to have have been so troublesome, especially with the frequent 'no rollback' problem! But lately I've been getting a few bsods which pointed to memory problems. I have 128GB 3600Mhz Corsair RAM (bought as a single  set and on the QVL ) and I know that 4 sticks has occasionally caused people problems on these boards, but I built the machine over a year ago and there were no memory problems until a month or so ago so I hope this is more a software/firmware/bios issue.

So yeah, might 2703 be worth a try? Might I notice a big change from 1304 in terms of power/heat etc? What about startup times? (Currently, Task Manager reports my bios time to be 8.2 seconds.) Mainly I'm keen to see if it might reduce the occasional bsods I seem to be getting just now.

Thanks