03-03-2022 04:31 PM
03-06-2022 02:23 AM
Memory not recognized and stable only at 2.000 Mhz clock.
03-06-2022 10:56 AM
There are many discussions on various forums about using 4 sticks of memory.
Try using 2 sticks of memory.
There are people who are saying that the problem is not the motherboards (BIOS) but the memory controller of the INTEL processor.
03-06-2022 02:16 PM
03-06-2022 07:07 PM
03-06-2022 08:18 PM
03-07-2022 01:21 AM
After more testing, it seems I found a bug with this beta BIOS.
This is with Z690-F / 12900 / DDR5 6000
I have been using the BIOS AI function for overclocking the CPU. With all previous BIOS versions, AI always resulted in 54/54/54/53, meaning when all P-CORES are running under full load, the CPU would run at 5300 MHZ. I could run the full 5 minute INTEL stress test with no problem.
Having 1302 flashed, I cannot run the INTEL stress, or any other stress anymore. The system freezes after a few seconds. I checked the applied multipliers with Intel utility and HWINFO, and found that apparently 1302 set the multiplier to 55/55/55/54, resulting in running all P-CORES at 5400 MHZ under load. Now, the point is that the 1302 BIOS itself shows (as for previous BIOS versions) in the AI screen: 54/54/54/53. It seems despite such BIOS indication, 1302 is actually applying higher ratios - which in turn freeze the system.
I just flashed back to 1003. And now the actually applied ratios are exactly as shown in BIOS.
Maybe, I am wrong. Could somebody try to replicate this?
I always thought this was the best review of combining memory kits here:
03-11-2022 01:37 AM
03-11-2022 05:04 AM
After updating to 1302, my Aura Sync stopped working with my Lian Li Lancool 2 Mesh's LED Fans. Anyone having the same problem?
If I downgrade back to 1003, Aura Sync is working with the case fans LED again. My MB is Z690-E.