September 25th Update: Beta BIOS Links (microcode 0x12B) Note: Some pages may not have propagated, please check back later ROG MAXIMUS Z790 HERO ROG MAXIMUS Z790 HERO EVA-02 EDITION ROG MAXIMUS Z790 DARK HERO ROG MAXIMUS Z790 APEX ROG MAXIMUS ...
I thought I'd share some results on Intel 14th gen and the ROG Z790 Apex Encore with memory scaling whilst investigating use cases for DIMM Flex. As most will know, in the exploration of DDR5 it's crucial to recognise that substantial CPU and memory ...
![JEDEC [Auto].png](/t5/image/serverpage/image-id/90524iC4C112D4D5016A20/image-size/medium?v=v2&px=400)
New 14900k build here. Coming from a 12900k + Maximus VIII mobo + 4 x m.2 drives + 4090.New build boots fine. M.2 drives are installed on the mobo in M2_2 through M2_5 slots (leaving M2_1 free for 16x lanes for the 4090). No other peripherals are ...
There is a BIOS, but it is for non-K processors.Since I use a 13700K, I don't think it will work.Now I'm worried that there won't be a microcode fix for the K versions.It's impossible for ASUS to have so much difficulty implementing it, since INTEL h...
With everything going on with intel i figured i would update my bios as i have done many times before. after the bios flash finished i tried to boot my pc and all i got was a black screen and the red CPU light staying on i let it try its thing for a ...
I use offset because manual undervolt causes severe performance loss. But in order to offset, I have to downgrade the microcode. I'm reluctant to do it because it says in the warning "may present security risks". Please help.
Flashed the new BIOS (2503 w/ 0x129 microcode), reset it to defaults, and it's having problems booting, often stopping at "LOAD VGA BIOS".I can get it to boot after a reboot, sometimes it takes a couple of tries. It wasn't doing this on BIOS 2402.I'd...
This is more for general community awareness rather than engaging in fault finding but:Since applying 0x129 microcode BIOS update 2503 08/08/2024) for ROG Z790E Gaming WiFi (1st edition) with intel 13900K Then with all loaded optimised defaults + XM...
I've just updated my TUF Gaming Plus WiFi Z790 board with i7-13700K CPU with BIOS 1663. I like to set a thermal limit of 85C since I have a Noctua fan for air cooling. The previous BIOS gave me a Cinebench score of 28526 (91.2% of max CPU score due ...
Take the following with a massive pinch of salt but my 13900K may be more stable in terms of its tunabilty since the x1209 microcode update. Not withstanding problems with XPMII profile stability which recently vanished when I revisited again applyin...
Earlier today I was running fine on the new x129 bios. I’d done many restarts setting up windows and all that….Once I was setup and stable I decided to try for a -0.1 global svid under volt. Before I was setup as default factory F5 settings plus xmp ...
About to do a new major build, and don't want to be stuck with the same annoyances from my last Asus build...Are bios fan speed options still restricted for "safety" to 60%+ for non PWM case fans plugged into board? Need to be able to go to 50% for s...
