Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...
I just finished a new build with subject MB with 13700K CPU and Windows 10. Had a recurring problem with high CPU utilization and the AIO fans running at very high speeds. Fan Xpert would not start. Discovered that the ASCOMSVC was causing the uti...
I recently swapped motherboards from an ASUS ROG Strix Z790-E, which had a faulty front panel USB-C port, to an ASUS Rog Strix Z790-A. (I realized I didn't need the PCIe 5.0 on the M.2 slot since it removes PCIe lanes from the GPU, so why not save so...
Asus TUF GAMING Z690-PLUS WIFI D4 BIOS 2103 dated 2202/10/19.TUF GAMING Z690-PLUS WIFI D4 BIOS 21031. Improve system overclocking stability on 13th Gen Intel Processors2. Update Microcode for 13th Gen Intel Processors3. Update Microcode for 12th Gen ...
Like the title says, this board will hang on restart. Not every time, but most times. I have to hard power it off, hard reset doesn't work. Nothing obvious in event viewer. Anyone else experience this? I have pretty much all settings in Bios set...
I was wondering if anyone knows why this the new driver (2.1.3.3) seems to show the Power Management option to Allow this device to wake the computer, checked and greyed out so not changeable? I normally keep mine unchecked so my system will sleep b...
Here is a list of my pieces of hardwareCPU: Intel 13th Gen 13900KSMotherBoard: Maximus Z790 ExtremeCPU Cooler: Asus Ryujin 2 ARGBRam: G-Skill DDR5-6400 32X4O.S. Storage: Samsung 990 Pro 1TBulk Storage: Samsun 980 Pro 2T x 2 (DIMM.2)PSU: MEG Ai1300P P...
I have even used gpu-z and got the same under load or not. Things I tried:-Reseating gpu-went into bios and tweak pch configuration-moved m2_1 to m2_2
https://pcpartpicker.com/list/hp9TLsAbove is my build for reference to hopefully help me with this issue. The RAM that I have is 7200 and I can't achieve that without enabling XMP to my knowledge. I have seen people say they enter their timings manua...
Hello all, I didn't realize by putting my Samsung 990 Pro (I know it's only Gen4) in the Gen5 nvme slot closest to the cpu, that it cuts the GPU lanes down to X8. My plan initially was to swap out the 990 Pro, with a Gen5 nvme drive when they came o...
Like the topic says, can't get 5200 to post for 64gb/4 sticks. If I run 32 gigs at 5200 it works no problem, xmp or manual no problem. I managed to get ahold of another set and it won't post at 5200 manual or xmp. Seems very finicky. Looks like 64 gb...
