Intel 700 & 600 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Make Future Motherboard Feature Suggestions Here!

Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...

xeromist by Moderator
  • 17659 Views
  • 143 replies
  • 94 kudos

Z790 Hero, strix 4090 - sometimes black screen on boot

Hello, I have Asus Maxiumus Z790 Hero and Asus ROG Strix GeForce RTX 4090, i9-13900K CPU. BIOS 1501. Sometimes I have black screen on boot(it happens about 1 in 10 cases). The problem occurs only when the Launch CSM BIOS option is disabled. The monit...

woopsie by Level 9
  • 1412 Views
  • 10 replies
  • 0 kudos

ROG CROSSHAIR X670E HERO and Ryzen 7950X3D DOCP Problem

I have new system and i have crosshair x670e hero motherboard and ryzen 7950X3D CPU.Also i have Corsair VENGEANCE RGB DDR5 RAM 64GB (4x16GB) 6000MHz (CMH32GX5M2B6000Z30K) ram.And my problem same other people. I cant enable expo with those rams. Cant ...

lysndr by Level 7
  • 282 Views
  • 0 replies
  • 0 kudos

Do SP scores normally vary with BIOS versions?

something odd happened.When I updated BIOS from 805 to 1702 (using 13900KF, to be able to use 14gen) the SP rating for 14700K came up consistently at 76, at multiple cold boots. However, having DDR5 difficulty with 1702, I flashed to 1501 and DDR5 di...

1TM1TM by Level 11
  • 464 Views
  • 1 replies
  • 0 kudos

Asus ROG Z790 MAXIMUS FORMULA PCI LANES

HelloI bought the Z790 MAXIMUS FORMULA and Nvidia 4090 24GB and 4 NVME of Samsung 990pro.I want to use X16 for GPU and configure RAID 10 for all 4 Nvme.Which slots i need to use and if not, if i will use Hyper M2 card it will help?I am little bit con...

B760-A GAMING WIFI D4 BIOS UPDATE

Hello, I have been updating my BIOS for more than an hour now using EZ Flash 3, the last thing I saw on my display before turning into black screen is something like “…installing ME firmware….” and then I cannot see any progress since then… My VGA li...

Weird Instability with MCE enabled and prime95 small FFTs

hey, so just was doing some testing and i found that worker #6 always has 2 fatal errors and stops the test when running with MCE Auto/Enabled. all the rest of the workers do not have errors at all. the error goes away and passes if MCE is disabled. ...

Vynra by Level 12
  • 191 Views
  • 3 replies
  • 1 kudos