Asus TUF GAMING Z690-PLUS WIFI D4 new bios Version 1504 dated 2022/06/02

[ahfoo]

Asus TUF GAMING Z690-PLUS WIFI D4 new bios dated 2022/06/02
Version 1504

"1. Improve DRAM stability
2. Add Wi-Fi 6 connection support in Ukraine and Russia."

https://dlcdnets.asus.com/pub/ASUS/mb/BIOS/TUF-GAMING-Z690-PLUS-WIFI-D4-ASUS-1504.zip

[martine-dee]

ahfoo wrote:
Well done my friend. One question, why you disabled Resiz bar support from bios. Keen to know.

I didn't. That screenshot shows the change from my settings to the optimized defaults. The left side is what I have.

[LoVe]

Hello guys, i have TUF GAMING Z690-PLUS with 4x8Gb of Kingston FURY (KF552C40BBAK2-16
16GB (8GB 1G x 64-Bit x 2 pcs.) DDR5-5200 CL40 288-Pin DIMM Kit).
Using XMP with the declared value i have with MemTest86 V9.4 FREE 2 errors on test 6, and testing them singular mode no errors...
My questions, voltage must me moved up? 1.25 are the official one to work at 5200, 1.3 can be setted? any idea? Thanks

my settings

[ahfoo]

LoVe wrote:
Hello guys, i have TUF GAMING Z690-PLUS with 4x8Gb of Kingston FURY (KF552C40BBAK2-16
16GB (8GB 1G x 64-Bit x 2 pcs.) DDR5-5200 CL40 288-Pin DIMM Kit).
Using XMP with the declared value i have with MemTest86 V9.4 FREE 2 errors on test 6, and testing them singular mode no errors...
My questions, voltage must me moved up? 1.25 are the official one to work at 5200, 1.3 can be setted? any idea? Thanks

my settings

Did you running memtest without XMP? If not, please try to see any error.

[LoVe]

ahfoo wrote:
Did you running memtest without XMP? If not, please try to see any error.

Hi, thanks for your reply, i did some test and i finished now.

without XMP using all 4 ram i have no errors.

Also i did some test with just 2 ram each time with XMPII selected (so DDR5 5200) etc details and have no errors on all 4 rams

I guess the problems come to the motherboard in some settings or some details or maybe the voltage i need to modify using all 4 rams in the same time.

[ahfoo]

So it rule out the RAM out of the box was working fine. running XMP and increase to 1.3v to see if any error.

[LoVe]

ahfoo wrote:
So it rule out the RAM out of the box was working fine. running XMP and increase to 1.3v to see if any error.

I found a fix! yes move up voltage helps on stability! thank you!