Asus Rog Strix Z790-E Gaming Wifi - XMP busts startup

[zfpuhi21]

Hello,

I have just finished with my new PC setup, I have installed windows 10 OC , updated it to the latest. Afterwards downloaded the BIOS update to 904 and updated the BIOS.

Afterwards I tried to activate the X.M.P. as my DDR wasn't properly used (was set to the lowest possible MHz) instead of as it should its '6000' MHz:

Model of DDR5 Ram:
- KINGSTON FURY BEAST DIMM KIT 64GB KF560C36BBEK2-64 | PC5-48000U DDR5-6000 | CL36-38-38 | 1.35V

As you can see from the screenshot bellow those are the settings that the "X.M.P" set that didn't work.

I checked few topics and I saw suggestions to changing the volts of VDD and VDDQ up to 1.41 I tried that but didn't work (the PC could not start at all).

Any suggestions would be great on how to resolve the issue.

[zfpuhi21]

Could it be because I haven't yet updated that ME tool (as I don't know how exactly) that the XMP ll didn't work on the RAM?

[Silent_Scone]

As above. 👍

The update tool can be downloaded from the support page and ran from within the OS.