cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS ROG STRIX Z690 BIOS 2305

arlicht
Level 9

Hey guys,

Anyone tried new bios 2305? Any thoughts?

1,288 Views
188 REPLIES 188

Xtracker
Level 8

I mean **Asus didn't mention that EZFlash will not work(downgrade) if you update to Newest 2305 Bios**

Hello Xtracker. Yes, as you mention, Asus didn't mention that EZ Flash doesn't allow a BIOS rollback after upgrading to 2305, nor did it mention that EZ Flash does allow you to rollback.
In my particular case, I already tried to rollback to a version prior to 2305 from EZ Flash and I couldn't do it.

Asus ROG Maximus Z690 Hero Motherboard - Intel i9-13900K - Asus Thor 1200p - Kingston Fury 128GB (4x 32GB) DDR5 4200MT/s (Trying to run 128GB at 5600MT/s) - 3x Firecuda 530 NVMe SSD 1TB - WD Black SN850 NVMe SSD 2TB - ASUS ROG STRIX RTX 4080 - Windows 11 Pro x64

RyanBlakeIT
Level 9

As others mention, I also cannot downgrade from 2305.  I have a ticket/case in with Asus but I'm still waiting on an answer.  I want to downgrade because my computer is now unstable and getting BSODs in Windows and having stability issues in Linux as well (I dual boot and have separate hard drives).  Was not happening before the BIOS update.

Motherboard: Asus Z690 Hero DDR5.

Ryan Blake - IT Leadership Professional
Asus ROG Maximus Z690 Hero Motherboard - Intel i7-12700KF - Corsair RM1000x - Corsair Vengeance DDR5 RAM 32GB (2x16GB) 6400MHz (CMK32GX5M2B6400C32) - 3x Samsung 980 Pro SSDs (1x 1TB & 2x 2TB) - eVGA GeForce RTX 3080Ti - Dual Boot Windows 10 Pro x64 & Manjaro Linux (Arch-based)

Yes, same here. I hope that when you get an answer from Asus you could share what they have told you, hoping it is a possible solution to this situation.

Asus ROG Maximus Z690 Hero Motherboard - Intel i9-13900K - Asus Thor 1200p - Kingston Fury 128GB (4x 32GB) DDR5 4200MT/s (Trying to run 128GB at 5600MT/s) - 3x Firecuda 530 NVMe SSD 1TB - WD Black SN850 NVMe SSD 2TB - ASUS ROG STRIX RTX 4080 - Windows 11 Pro x64

gian1200
Level 7

For some reason after the update I always get POST code 11 after any restart. The workaround is to hold power button and turn it on again. Not sure what is triggering it, but it's a nuisance to do it everytime

Did you try backing up your BIOS settings, clearing the CMOS and then seeing if it behaves better now?  If not, you can restore the CMOS config from your backup.

Ryan Blake - IT Leadership Professional
Asus ROG Maximus Z690 Hero Motherboard - Intel i7-12700KF - Corsair RM1000x - Corsair Vengeance DDR5 RAM 32GB (2x16GB) 6400MHz (CMK32GX5M2B6400C32) - 3x Samsung 980 Pro SSDs (1x 1TB & 2x 2TB) - eVGA GeForce RTX 3080Ti - Dual Boot Windows 10 Pro x64 & Manjaro Linux (Arch-based)

MrAgapiGC
Level 13

So far is ok. BUT i am using 16.1.25.2124 firmware and mokichu main 3 drivers and networks stable and no issue on windows 11 (asus z690 apex)

Learn, Play Enjoy!

Hello,

 

Z690 FORMULA

GSKILL 6600 16 GB X 2

 

NEW BIOS CRUSH ON XMP I AND II, WORKS FINE WITH XMP DISABLED. ALSO CANT ROLL BACK 2204 BIOS NEITHER EZ FLASH NOR BIOS FLASHBACK (unkown file error ?)

Unfortunately, I also have this problem. I had to disable XMP. My RAM is team group with 6400 MHz frequency and main board is z690-F 

sischka
Level 8

Hey guys, so I called ASUS support and explained the issue I was having also that many others where as well, and I am not sure how up to speed support is cause they wanted me to send the board in for RMA, I explained that if I did the RMA and received a new board the the second I updated to 2305 it would be another RMA return, so I guess I am stuck waiting for a bios update because this issue is quite a stain on ASUS if you ask me.