12-27-2021 01:58 PM
01-28-2022 08:44 AM
It looks like BIOS 1003 fixed the compatibility issues and can now run both XMP 1 and 2 at 6000mhz
windows still thinks its DDR5-4800 at 2400mhz, and lots and lots of BSD's
01-28-2022 04:32 PM
03-19-2022 07:35 AM
03-19-2022 08:38 PM
A1 and A2 slots wont boot, error code 55.
03-22-2022 12:35 AM
Im having the SAME issues.
Asus z690 Maximus Hero
Corsair Dominator 2x16gb 5600Mhz
Gigabyte Aorus Waterforce x 360
A1 and A2 slots wont boot, error code 55. IF I take the AIO out and reseat the CPU it works.
03-22-2022 10:00 AM
Silent Scone@ROG wrote:
Sounds like a mounting issue then, no? Improper pin contact will impact memory detection, which is what the code means (55 - Memory not installed).
03-29-2022 04:33 PM
04-05-2022 05:22 PM
04-05-2022 07:09 PM
Put a new kit of Corsair Dominator Platium 5600Mhz totaling 64gb, in other words, 4x16GB.
Updated to new BIOS 1403.
Using both xmp II and xmp disabled I haven't had any problems while gaming yet.
PC boots incredibly fast without XMP and with XMP enabled like 5-10 secs. It's nothing compared to the other BIOS
01-25-2022 04:28 PM
So what have you done to get your slots to work? I'm thinking of increasing voltage to see if it would work.
Literally scrambling everything and reading everywhere, just want to get use of the extra RAM, unfortunately still no luck.