So running into an issue new Asus Prime Z690-P D4 install, was getting 1 beep after post and 1 long 3 short. reseated memory and video. Can it the video to boot up fine with the I7-12700k CPU video but if I switched to PCIE video on my Strix 3090 nothing blank screen can here the computer boot up got through post but nothing. Automatically swicthed back to CPU video after reboot. the only way I can get it to stay on auto was to enable mutl monitor support. But still cannot get the video card to deosplay tried slot 1 at gen 4 and Slot 2 which is gen 3. Will only work with CPU video
running NZXT 1000 3 seperate PCIE cables Hardware Asus Prime Z690-P D4 Wifi Intel Core i7-12700K - Core i7 12th Gen Alder Lake 12-Core (8P+4E) 3.6 GHz LGA 1700 125W Intel UHD Graphics 770 Desktop CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Desktop Memory Model CMK32GX4M2E3200C16W NZXT 1000 PSU Samsung 1tb PCIE, was installed in PCIE m.2 Slot 1 (removed during testing) NZXT H710 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Cable
Anybody run accroiss this or have any recommendation on what the issue could be?